ADS Environmental Services IETG FlowHawk QR 775012 A4 - Manual (Page 212)

Configuration and Activation 6-33
Note: The stored temperature value is the actual water
temperature reading from the Peak/Slimline Peak Combo
Sensor.
 Store Data Select this checkbox to ensure the monitor logs
the temperature data to memory. This option is selected by
default.
Editing the Surface Combo Sensor Device
The following section provides descriptions for the parameters
corresponding to the Surface Combo Sensor device.
Note: The parameters for an Ultrasonic Depth Sensor
with the pressure option are also set through the Smart
Depth, Pressure, and Temperature tabs on the Edit
Surface Combo 1 Parameters device dialog.