Installing the wireless antenna – ADS Environmental Services IETG FlowHawk QR 775012 A4 User Manual

Page 126

Advertising
background image

4-8

IETG FlowHawk Manual

Installing the Wireless Antenna

Before installing the GSM Module into the manhole, install one of
the following antennas:

Wireless, slim, quad-band antenna (p/n 3800-0162)

Wireless, mini-wing, quad-band antenna (p/n 3800-0163)

Mini-wing antenna

Install a wireless slim or mini-wing antenna in the road, in dirt, or
under other paving materials in the following way:

Note: While this section describes the process for
installing these antennas, all wireless antennas provided
through IETG also include detailed installation
instructions.

1. Determine the appropriate location in the road near the

manhole to install the antenna:

 Locate the antenna in the road between 457 and 762 mm

(18 and 30 in) from the manhole in which the monitor is
installed. Position the antenna as far as possible from the
massive iron frame and buried flange to prevent shunting
of the RF signal.

 Avoid locations at which cars will remain parked over the

antenna for extended periods (hampering the signal
strength).

 Select a location that drains well so that water will not

collect over the antenna, blocking the signal.

Advertising