ADS Environmental Services IETG FlowHawk QR 775012 A4 - Manual (Page 388)

Index In-7
mounting Surface Combo
Sensor to the ring assembly,
3-29
mounting to the ring, 3-21
mounting Ultrasonic Depth
Sensor to the ring assembly,
3-29
ring assembly, 3-11
standard mount, 3-45
surcharge mount, 3-50
SIM card
EMU, 4-31
EMUX, 4-41
GSM module, 4-13
site investigation, 3-4
Slimline Peak Combo Sensor
1/2-band mount, 3-41
3/4-band mount, 3-39
special, 3-5, 3-33
1/2-band mount, 3-41
3/4-band mount, 3-39
mounting the Peak Combo
Sensor, 3-38
mounting the Slimline Peak
Combo Sensor, 3-38
parts and supplies, 3-34
tools, 3-37
standard, 3-5, 3-7
mounting sensors to the ring,
3-21
parts and supplies, 3-8
ring assembly, 3-11
tools, 3-10
Surface Combo Sensor
standard mount, 3-45
Ultrasonic Depth Sensor
standard mount, 3-45
surcharge mount, 3-50
wireless antenna, 4-8
EMUX, 4-47
installation table
creating, 6-11
IntelliServe
receiving test cryouts from the
monitor, 8-8
internal power
12-volt IS battery pack, 1-4, 2-11
interval, 6-56
intrinsic safety (IS), 1-2
certified tools, 1-5
maintenance, 1-7
IP address, 8-5
IS battery pack, 1-4, 2-11
IS certification
Peak Combo Sensor, 1-3
sensors, 1-3
Slimline Peak Combo Sensor, 1-3
Surface Combo Sensor, 1-3
IS sensors, 2-14
L
LED window
EMUX codes, D-10
GSM module, 8-4
monitor activity codes, 8-5, C-1
viewing monitor diagnostic codes
from the GSM module, 8-5
leveling
Surface Combo Sensor, 3-30
Ultrasonic Depth Sensor, 3-30
location configuration, 6-5
Location Information File (LIF), 2-3,
6-3
logs
data collection, 6-98
diagnostic, 6-98
firmware upgrade, 6-98
monitor activation, 6-98
low voltage, 8-8