ADS Environmental Services IETG FlowHawk QR 775012 A4 User Manual
Page 155
Communication
4-37
One of the holes through which to secure the EMU to the panel
2. (applicable only to FlowHawk monitors containing the 12-volt
IS battery pack) Disconnect the battery pack cable from the
regulator dome cable in the FlowHawk or disconnect and
remove the 12-volt IS battery pack completely from the
canister.
WARNING: Failing to disconnect the 12-volt IS battery
pack from the monitor regulator and applying external
power may result in acid discharge from the battery pack
and/or an explosion over time.
3. Connect the end of the communication cable entering the
manhole to the COMM port on the top of the flow monitor.
Wrap rubber stretch tape around the entire cable connection,
extending 25 to 50 millimeters onto the cable beyond the
connection.