ADS Environmental Services IETG FlowHawk QR 775012 A4 - Manual (Page 190)

Configuration and Activation 6-11
Creating an Installation Table
Creating an installation table involves defining the size, shape, and
physical characteristics of the monitoring point in order to allow the
software to properly calculate the correct depths and corresponding
quantities at the monitoring point. One installation table must be
created for each monitoring point.
The user can create an installation table using the Installation
Generator in the Profile software in the following way:
1. Select the monitoring point for which you want to create the
installation.
Monitoring Point 1 selected from location ADSTown_001
2. Select Tools > Installation Generator from the main menu or
click on the Installation Generator toolbar button on the
Profile main screen.
Installation Generator toolbar button
The Create Installation – Introduction dialog in the wizard
displays.