Altera DisplayPort MegaCore Function - Manual (Page 83)

Example 6-2: Example Hardware Setup
Figure 6-10: Example Hardware Setup Using FPGA Development Board, Bitec Daughter Card,
and Cables.
Related Information
• Altera Stratix V GX FPGA Development Kit
• Arria V GX FPGA Starter Kit
• Cyclone V GT FPGA Development Kit
• Arria 10 FPGA Development Kit
Design Walkthrough
Setting up and running the DisplayPort hardware demonstration consists of the following steps. A variety
of scripts automate these steps.
1. Set up the hardware.
2. Copy the design files to your working directory.
3. Build the FPGA design.
4. Build the software, download it into the FPGA, and run the software.
5. Power-up the DisplayPort monitor and view the results.
6-22 Design Walkthrough
UG-01131
2015.05.04
Altera Corporation DisplayPort IP Core Hardware Demonstration
Send Feedback