Adept AdeptSight Reference Guide - Manual (Page 232)

GreyLevelResultsEnabled
VPARAMETER
1608
Enables the computation of the following blob greylevel properties: BlobGreyLevelMaximum,
BlobGreyLevelMean, BlobGreyLevelMaximum, BlobGreyLevelMinimum, BlobGreyLevelRange, and
BlobGreyLevelStdDev.
Syntax
Micro V+
VPARAMETER (sequence_id, tool_id, 1608, index_id, object_id) = value
value = VPARAMETER (sequence_id, tool_id, 1608, index_id, object_id)
V+
VPARAMETER (sequence_id, tool_id, 1608, index_id, object_id) $ip = value
value = VPARAMETER ($ip, sequence_id, tool_id, 1608, index_id, object_id)
Type
Boolean
Range
Value Description
1 The greylevel blob properties will be computed
0 No greylevel blob properties will be computed
Parameters
$ip IP address of the vision server. Applies to V+ syntax only. Uses standard IP
address format, for example: 192.168.1.120.
sequence_id Index of the vision sequence. The first sequence is 1.
tool_id Index of the tool in the vision sequence. The first tool is 1.
GreyLevelResultsEnabled
AdeptSight Reference Guide, v3.2.x, Updated: 5/8/2012
Page 232