Adept AdeptSight Reference Guide - Manual (Page 316)

LoadProject
VPARAMETER
10300
This command code is not directly supported in AdeptSight 3.x at this time. Please
contact Adept Technical Support for programming options.
Loads the selected vision project file (*.hsproj). This clears all the sequences, settings and data, including
calibration data, that are currently in the vision project.
Type
Long
Example
See SaveSequence for an example of the syntax and the use of all Load and Save properties.
Related Topics
SaveSequence
SaveProject
LoadProject
AdeptSight Reference Guide, v3.2.x, Updated: 5/8/2012
Page 316