Adept AdeptSight Reference Guide - Manual (Page 249)

ImageHeight
VRESULT
1021
Height of the tool's region of interest expressed in pixels. Read only.
Syntax
Micro V+
value = VRESULT (sequence_id, tool_id, instance_id, 1021, index_id, frame_id)
V+
value = VRESULT ($ip, sequence_id, tool_id, instance_id, 1021, index_id, frame_id)
Type
Long
Range
Greater than or equal to 0.
Parameters
$ip IP address of the vision server. Applies to V+ syntax only. Uses standard
IP address format, for example: 192.168.1.120.
sequence_id Index of the vision sequence. The first sequence is 1.
tool_id Index of the tool in the vision sequence. The first tool is 1.
instance_id Index of the instance for which you want the result.
ID 1021: the value used to reference this property.
index_id N/A
frame_id N/A
ImageHeight
AdeptSight Reference Guide, v3.2.x, Updated: 5/8/2012
Page 249