Adept AdeptSight Reference Guide - Manual (Page 47)

Abort
VPARAMETER
5501
Stops the execution of the specified Virtual Camera tool. Write only.
Syntax
Micro V+
VPARAMETER (sequence_id, tool_id, 5501, index_id, object_id) = value
V+
VPARAMETER (sequence_id, tool_id, 5501, index_id, object_id) $ip = value
Type
Boolean
Parameters
$ip IP address of the vision server. Applies to V+ syntax only. Uses standard IP
address format, for example: 192.168.1.120.
sequence_id Index of the vision sequence. The first sequence is 1.
tool_id Index of the tool in the vision sequence. The first tool is 1.
ID 5501: the value used to reference this property.
index_id N/A
object_id N/A
Abort
AdeptSight Reference Guide, v3.2.x, Updated: 5/8/2012
Page 47