Adept AdeptSight Reference Guide - Manual (Page 551)

Calculated Point Properties
The Calculated Point can be calculated based on the intersection two lines, a line and a circle, or midway
between two points. A Calculated Point tool is also used to place a fixed point in the field of view. A fixed
point could be used if you want to make all your measurements from a known reference point.. This tool
calculates a point based on a specific calculation mode. Possible modes are:
• Midpoint (midpoint between two points)
• Point and a line (closet point on the line to another point)
• Point and an arc (closest point on the arc to another point)
• Fixed point
• A line and an arc (Line/Arc intersection)
• Two lines (Line-line intersection)
• Two arcs (Arc-arc intersection)
Property Name
V+/MicroV+
Keyword
V+/MicroV+ ID Access Type
ElapsedTime VRESULT 1001 R - O Double
FrameTranslationX VRESULT 2400 R - O Double
FrameTranslationY VRESULT 2401 R - O Double
InstanceCount VRESULT 1310 R - O Long
InstanceLocation VLOCATION 1311 R - O Location
InstanceRobotLocation VLOCATION 1371 R - O Location
ResultCount VRESULT 1010 R - O Long
ShowResultsGraphics VPARAMETER 150 R / W Boolean
Calculated Point Properties
AdeptSight Reference Guide, v3.2.x, Updated: 5/8/2012
Page 551