Adept AdeptSight Reference Guide - Manual (Page 340)

MeasurementPointsCount
VRESULT
2002
The number of points where the local sharpness is evaluated. When the Image Sharpness tool is executed,
it scans the region of interest and identifies a number of candidate locations (equal to
CandidatePointsCount) where the local standard deviation is the highest. The local sharpness is then
evaluated at each of the candidate locations that has a local standard deviation above
StandardDeviationThreshold. Read only.
Syntax
Micro V+
value = VRESULT (sequence_id, tool_id, instance_id, 2002, index_id, frame_id)
V+
value = VRESULT ($ip, sequence_id, tool_id, instance_id, 2002, index_id, frame_id)
Type
Long
Range
Minimum: 0
Maximum: CandidatePointsCount
Parameters
$ip IP address of the vision server. Applies to V+ syntax only. Uses standard IP
address format, for example: 192.168.1.120.
sequence_id Index of the vision sequence. The first sequence is 1.
tool_id Index of the tool in the vision sequence. The first tool is 1.
ID 2002: the value used to reference this property.
index_id N/A
object_id N/A
MeasurementPointsCount
AdeptSight Reference Guide, v3.2.x, Updated: 5/8/2012
Page 340