Adept AdeptSight Reference Guide - Manual (Page 265)

InstanceFitQuality
VRESULT
1317
Normalized average error between the matched model contours of the selected object instance and the
actual contours detected in the input image. Fit quality ranges from 0 to 1, with 1 being the best quality. A
value of 1 means that the average error is 0. Conversely, a value of 0 means that the average matched
error is equal to conformity tolerance. Read only.
Syntax
MicroV+
value = VRESULT (sequence_id, tool_id, instance_id, 1317, index_id, frame_id)
V+
value = VRESULT ($ip, sequence_id, tool_id, instance_id, 1317, index_id, frame_id)
Remarks
Index of frame that contains the specified instance. Range: [1, ResultCount -1]
Type
Double
Range
Minimum: 0.0
Maximum: 1.0
Parameters
sequence_id Index of the vision sequence. The first sequence is 1.
tool_id Index of the tool in the vision sequence. The first tool is 1.
instance_id Index of the instance for which you want the result.
ID 1317: the value used to reference this property.
index_id N/A
InstanceFitQuality
AdeptSight Reference Guide, v3.2.x, Updated: 5/8/2012
Page 265