Adept AdeptSight Reference Guide - Manual (Page 348)

MinimumModelPercentage
VPARAMETER
557
Minimum percentage of model contours that need to be matched in the input image in order to consider
the object instance as valid.
Syntax
MicroV+
VPARAMETER (sequence_id, tool_id, 557, index_id, object_id) = value
value = VPARAMETER (sequence_id, tool_id, 557, index_id, object_id)
V+
VPARAMETER (sequence_id, tool_id, 557, index_id, object_id) $ip = value
value = VPARAMETER ($ip, sequence_id, tool_id, 557, index_id, object_id)
Type
Double
Range
Minimum: 0.1 or greater.
Maximum: 100.0
Parameters
$ip IP address of the vision server. Applies to V+ syntax only. Uses standard IP
address format, for example: 192.168.1.120.
sequence_id Index of the vision sequence. The first sequence is 1.
tool_id Index of the tool in the vision sequence. The first tool is 1.
ID 557: the value used to reference this property.
index_id N/A
object_id N/A
MinimumModelPercentage
AdeptSight Reference Guide, v3.2.x, Updated: 5/8/2012
Page 348