Adept AdeptSight Reference Guide - Manual (Page 349)

MinimumRequiredFeatures
VPARAMETER
560
Minimum percentage of required features that must be recognized in order to consider the object instance
as valid.
Syntax
MicroV+
VPARAMETER (sequence_id, tool_id, 560, index_id, object_id) = value
value = VPARAMETER (sequence_id, tool_id, 560, index_id, object_id)
V+
VPARAMETER (sequence_id, tool_id, 560, index_id, object_id) $ip = value
value = VPARAMETER ($ip, sequence_id, tool_id, 560, index_id, object_id)
Type
Double
Range
Minimum: 0.1 or greater.
Maximum: 100.0
Remark(s)
The minimum percentage of required features is expressed in terms of the number of required features
in a model without considering the amount of contour each required feature represents in the model.
For example, if the model contains 3 required features and MinimumRequiredFeatures is set to
50%, an instance of the object will be considered valid as long as 2 out of 3 required features are
recognized.
Parameters
$ip IP address of the vision server. Applies to V+ syntax only. Uses standard IP
address format, for example: 192.168.1.120.
MinimumRequiredFeatures
AdeptSight Reference Guide, v3.2.x, Updated: 5/8/2012
Page 349