Adept AdeptSight Reference Guide - Manual (Page 423)

SaveBeltCalibration
VPARAMETER
10325
This command code is not directly supported in AdeptSight 3.x at this time. Please
contact Adept Technical Support for programming options.
Saves the calibration data for the specified conveyor belt to a calibration file (*hscal).
Type
Long
Example
See SaveSequence for an example of the syntax and the use of all Load and Save properties.
Related Properties
SaveRobotCalibration
LoadBeltCalibration
SaveBeltCalibration
AdeptSight Reference Guide, v3.2.x, Updated: 5/8/2012
Page 423