Adept AdeptSight Reference Guide - Manual (Page 427)

SaveProject
VPARAMETER
10320
This command code is not directly supported in AdeptSight 3.x at this time. Please
contact Adept Technical Support for programming options.
Saves the current vision project to file(*.hsproj). The data saved to the project file includes the
configuration of the sequences in the project and system devices settings, including the calibration data of
the devices.
Type
Long
Example
See SaveSequence for an example of the syntax and the use of all Load and Save properties.
Related Topics
SaveSequence
LoadProject
SaveProject
AdeptSight Reference Guide, v3.2.x, Updated: 5/8/2012
Page 427