Rugged Cams Premier DVR User Manual
Page 94
Advertising
93
When the selection box is displayed, select Off or second using the direction (ST) buttons and
press the [SELECT] button.
E) POST
Sets the time duration that will continue recording after the event ends..
The unit of the setting time value is second, and the recording is continued for the time interval set, each
time an event is detected.
Post
Pre
Event
Using the direction (STWX) buttons, move focus to the channel you want to set in the {Data
setup} Æ {Data1~4} Æ {Event}Æ{Post} menu and press the [SELECT] button.
To set all channels with the same value at once, move the focus to the {Post} and press the
[SELECT] button.
Advertising