Canon imagePROGRAF GP-4000 User Manual
Page 176
◦ Inward Winding
◦
Important
• If the roll holder lifts up, it may cause an error.
•
7. Make sure
Inward/Outward Winding Changeover
switch on roll unit is in desired direction
7.
and press
Auto Take-up/Pause
button.
The
Pause
lamp, which has been lighted up to this point, turns off, and the
Auto Take-up
lamp lights up instead.
The winding preparation is complete. During printing, the winding starts. Before printing, the
winding starts at the same time as the printing.
Important
• When winding inwardly, loosening of the wound paper can be prevented by pressing the
•
roll paper with the arm. However, doing so may produce pressure traces on the paper.
In this case, tap the roll unit area of the media information display area and set
Paper
retention settings
to
Release
.
176