Roll paper is not switched automatically, When roll paper cannot be fed automatically, see – Canon imagePROGRAF GP-4000 User Manual
Page 718
Advertising
Roll Paper Is not Switched Automatically
When using certain paper types and widths under certain temperature and humidity conditions, roll paper
auto switching may not be possible.
Set
Paper retention settings
to
Release
in the touch screen menu and feed the paper manually.
Menu Structure
Loading the Upper Roll on the Printer
Loading the Lower Roll on the Roll Unit (Option)
Note
• Roll paper cannot be fed or switched automatically until you change this setting.
If the roll cannot be switched at the end, make sure
Switch roll paper when low
is set to
Enable
.
Paper Source Does Not Switch When Roll Paper Is Used Up
718
Advertising