Opens the, Custom, Dialog box – Canon imagePROGRAF GP-4000 User Manual
Page 627: View settings, Custom dialog box, View settings dialog box
Cut Speed
Select auto-cut speed. This can be adjusted when paper cannot be cut precisely with auto-cut.
Printer Default
Settings in printer unit operation panel are applied.
Fast
Select when cut is not smooth with
Standard
settings.
Standard
Select when there are no particular problems with auto-cut.
Slow
If this is selected for paper with adhesive, the cutter will not stick to the adhesive easily and it will
slow deterioration of the cutter's capabilities.
Unidirectional Printing
Controls color unevenness and unaligned ruled lines.
Please check when printing in one direction.
Calibration Value
The results can be applied when printing in the event color calibration was set in printer unit. Please
select
Use Value
when applying calibration.
Mirror
Select whether to print reflected image or not. When you select this check box, text and images will
be printed as if reflected in a mirror.
Custom dialog box
Set the quality level, and select the desired print quality.
Quality
You can use the slider bar to adjust the print quality level.
Important
• Certain print quality levels cannot be selected depending on the settings of
Media Type
.
Note
• The
Highest
,
High
, or
Standard
print quality modes are linked with the slider bar. Therefore
when the slider bar is moved, the corresponding quality and value are displayed on the left. This
is the same as when the corresponding quality is selected for
Print Quality
on the
Main
tab.
View Settings dialog box
Print Target
Select the print purpose. The settings of the selected print purpose are displayed in
Details
.
Name
Displays the name of the selected print purpose.
Details
Displays the settings of the print purpose that was selected for
Print Target
.
627