Canon imagePROGRAF GP-4000 User Manual
Page 775
Loading the Upper Roll on the Printer
Loading the Lower Roll on the Roll Unit (Option)
Loading Sheets in the Printer
Check 4
Is the Roll Paper loaded at an angle?
If there is a gap between the roll paper and the roll holder, reload the roll paper.
Loading the Upper Roll on the Printer
Loading the Lower Roll on the Roll Unit (Option)
Check 5
Paper may have been fed at an angle.
When
Roll paper auto feed
is set to
Disable
, feed the roll paper into the printer so that there is no gap between
the right edge of the roll paper and the roll holder.
Loading the Upper Roll on the Printer
Loading the Lower Roll on the Roll Unit (Option)
Check 6
Is
Detect paper width
set to
Disable
?
Set
Detect paper width
in the touch screen menu to
Enable
to load the paper.
Check 7
Is
Skew detection accuracy
in the touch screen menu set to
Loose
or
OFF
?
Set
Skew detection accuracy
to
Standard
, and then reload the paper.
775