Canon imagePROGRAF GP-4000 User Manual
Page 178
Advertising
6.
Hold printed paper between output guide and roll unit, then tap
Yes
.
6.
The roll is now cut.
Important
• When cutting the roll paper, always hold the printed paper. If cut without holding the printed paper,
•
the paper may fall to the floor and become soiled.
7.
While holding trailing edge of printed paper, press
Take-up
or
Rewind
button to wind
7.
printed paper.
Apply adhesive tape to the rewound paper to hold it in place, if necessary.
Important
• Be careful not to scratch the printed surface.
•
8.
Change
Roll Holder Lock
switch on roll unit to release side.
8.
9.
Hold roll holder by its flanges (A), and remove from roll unit.
9.
178
Advertising