Canon imagePROGRAF GP-4000 User Manual
Page 765
Check 9
Color may be uneven if printing materials were stacked while drying
To avoid uneven colors, we recommend drying each sheet separately.
Check 10
Is
Ink drying target area
for
Pause between scans
in the touch screen
menu set to
Leading edge
?
If the
Ink drying target area
for
Pause between scans
is set to
Leading edge
, color may be uneven
approximately 4.3 to 6.3 inches (110 to 160 mm) from the front edge of the paper. (The position depends
on the
Print Quality
settings)
On the home screen of the touch screen, tap the paper setting display area, tap the paper feed slot where the
paper whose settings to change is set, and then tap
Paper settings
>
Advanced
>
Pause between scans
>
Ink drying target area
and set to
Overall
.
However, note that printing will now take longer.
Check 11
Make sure you are not printing cut sheet with AirPrint (macOS)
When you print cut sheets with AirPrint, uneven or streaked colors may occur at the trailing edge of the sheet.
To print cut sheets with AirPrint, from the touch screen menu, tap
Printer settings
>
Paper-related settings
>
Keep margin at cut sheet end
.
Note
• Set
Keep margin at cut sheet end
to
Enable
to increase the margin at the trailing edge of the sheet.
765