Cutting roll paper after printing – Canon imagePROGRAF GP-4000 User Manual
Page 583
Cutting Roll Paper after Printing
The procedure for cutting roll paper automatically and printing cut guidelines is as follows:
1.
Open the
1.
2.
Select the paper source
2.
For
Paper Source
on the
Page Setup
tab, select the setting that matches your purpose from
Roll Paper
(Auto)
,
Roll 1
, and
Roll 2
.
Important
• The paper feed method will differ depending on the lower level (roll paper 2) settings or roll unit
option settings.
3.
Display
Roll Paper Options
dialog box
3.
Click
Roll Paper Options
to display the
Roll Paper Options
dialog box.
4.
Set auto cut
4.
From
Automatic Cutting
, select the item that matches your purpose.
The current settings are displayed in the settings preview on the left side of the
Page Setup
tab.
•
Yes
•
The roll paper is cut automatically after printing.
•
No
•
583