Canon imagePROGRAF GP-4000 - Manual (Page 273)

Outgoing password
To set / change the password for sending in order to perform the authentication, check the
Set/change password and then enter the password.
POP before SMTP
Select if you send e-mail with POP before SMTP authentication.
Then select OK , and then make the following settings.
Incoming mail server (POP3)
Enter the address of your POP3 server.
Port number (POP3)
Enter the port number of your POP3 server.
Incoming account
Enter the account name for receiving to perform the authentication.
Incoming password
To set / change the password for receiving in order to perform the authentication, check the
Set/change password and then enter the password.
Use APOP authentication
Select if you send the password by the encryption transmission.
Clear mailbox
Select if you delete the e-mails that remain in the POP3 server.
Important
• When this setting is enabled, e-mail in the Inbox on the server will have all been
removed. If you specify the e-mail address of your everyday, be sure to disable this
setting as unread e-mail is not deleted. We recommended that you prepare this printer
dedicated e-mail account not to accidentally delete the unread e-mail.
5. Select OK . 5.
The setting operation is completed.
273