Canon imagePROGRAF GP-4000 - Manual (Page 532)

Note
• If the value you entered is the same as the other roll widths, a message will be displayed, and the
other roll paper sizes will be set.
5. Complete the setup 5.
Click OK on the Page Setup tab.
If you perform the print, the roll paper with the specified width will be used for printing with each setting
applied.
Note
• If the paper settings in the printer driver differ from the paper information registered on the printer, an
error message may appear on the printer's operation panel. You can execute Print, but you may not
obtain the correct printing result.
• If you select a paper feed method for the custom size roll paper in Get Information... in the Main tab,
Roll Paper Width is set to Custom Size (XXXX) .
However, if the same custom size is already set in User-defined1 (XXXX) or User-defined2 (XXXX) ,
it will not be set to Custom Size (XXXX) , and User-defined1 (XXXX) or User-defined2 (XXXX) will be
selected instead.
532