Fortinet 548B - Manual (Page 125)

- 125 -
no - This command restores collector max-delay time of Link Aggregation Control Protocol (LACP)
on a port-channel
Default Setting
0
Command Mode
Interface Config
7.2.10.12 channel-group
This command adds one port to the port-channel (LAG). The first interface is a logical slot and port
number of a configured port-channel.
i
Before adding a port to a port-channel, set the physical mode of the port. See ‘speed’
command.
Syntax
channel-group <logical slot/port>
<logical slot/port> - Port-Channel Interface number.
Default Setting
None
Command Mode
Interface Config
Command Usage
The maximum number of members for each Port-Channel is 8.
7.2.10.13 delete-channel-group
This command deletes the port from the port-channel (LAG). The interface is a logical slot and port
number of a configured port-channel.
Syntax
delete-channel-group <logical slot/port>
<logical slot/port> - Port-Channel Interface number.