Fortinet 548B - Manual (Page 418)

- 418 -
8.1.2.5 arp dynamicrenew
This command enables ARP component to automatically renew ARP entries of type dynamic when they
age out.
Syntax
arp dynamicrenew
no arp dynamicrenew
no - This command disables ARP component from automatically renewing ARP entries of type
dynamic when they age out.
Default Setting
Disabled
Command Mode
Global Config
8.1.2.6 arp purge
This command causes the specified IP address to be removed from the ARP table. Only entries of type
dynamic or gateway are affected by this command.
Syntax
arp purge <ipaddr>
<ipaddr> - The IP address to be removed from the ARP table.
Default Setting
None
Command Mode
Privileged Exec
8.1.2.7 arp resptime
This command configures the ARP request response timeout.
Syntax
arp resptime <1-10>
no arp resptime