Fortinet 548B User Manual
Page 690
- 690 -
Command Buttons
Reset - Send the updated screen to the switch to restart the DHCP client.
11.2.14.1.1
Configurating DHCPv6 Restart Page
This command issues a DHCP6 client request for any IP interface that has been set to DHCP mode via
the ip address command. DHCP requires the server to reassign the client's last address if available. If
the DHCP server has been moved to a different domain, the network portion of the address provided to
the client will be based on this new domain.
Command Buttons
Reset - Send the updated screen to the switch perform the restart DHCP6 client.
11.2.14.2 Configuring DHCP Client-identifier Page
Specify the DCHP client identifier for the switch. The DCHP client identifier is used to include a client
identifier in all communications with the DHCP server. The identifier type depends on the requirements
of your DHCP server.
Selection Criteria
DHCP Identifier - Specifies the type of DHCP Identifier.
Default
Specific Text String
Specific Hexadecimal Value