Fortinet 548B - Manual (Page 405)

- 405 -
Syntax
queue trust {dot1p | ip-dscp | untrusted } all
no queue trust all
no - This command sets the class of service trust mode to untrusted for all interfaces.
Default Setting
None
Command Mode
Global Config.
7.24.2.3 queue cos-queue min-bandwidth
This command specifies the minimum transmission bandwidth guarantee for each interface queue.
Syntax
queue cos-queue min-bandwidth <bw-0> <bw-1> … <bw-6>
no queue cos-queue min-bandwidth
<bw-0> <bw-1> … <bw-6>- Each Valid range is (0 to 100) in increments of 5 and the total sum is
less than or equal to 100.
no - This command restores the default for each queue's minimum bandwidth value.
Default Setting
None
Command Mode
Interface Config.
This command specifies the minimum transmission bandwidth guarantee for each interface queue in the
device.
Syntax
queue cos-queue min-bandwidth all <bw-0> <bw-1> … <bw-6>
no queue cos-queue min-bandwidth all