Fortinet 548B - Manual (Page 20)

- 20 -
copy <url> startup-config <filename> Sets the download datatype to be an image or
config file.
The URL must be specified as:
tftp://ipAddr/filepath/fileName.
The startup-config option downloads the
config file using tftp and image option
downloads the code file.
3.5.8 Quick Start up Factory Defaults
Table 2-8 Quick Start up Factory Defaults
Command Details
clear config Enter yes when the prompt pops up to clear all
the configurations made to the switch.
copy running-config startup-config
[filename]
Enter yes when the prompt pops up that asks
if you want to save the configurations made to
the switch.
reload Enter yes when the prompt pops up that asks
if you want to reset the system.
You can reset the switch or cold boot the
switch; both work effectively.