Fortinet 548B - Manual (Page 525)

- 525 -
<slot/port> - Interface number.
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
Slot/Port: Valid slot and port number separated by forward slashes.
IP Address: This field indicates the IP address of the specified interface.
Subnet Mask: This field indicates the Subnet Mask for the IP address of the PIM interface.
Hello Interval: This field indicates the frequency at which PIM hello messages are transmitted on
this interface. This is a configured value. By default, the value is 30 seconds.
Join Prune Interval: This field indicates the join/prune interval for the PIM-SM router. The interval is
in seconds.
Neighbor Count: This field indicates the neighbor count for the PIM-SM interface.
Designated Route: This field indicates the IP address of the Designated Router for this interface.
DR Priority: This field indicates the priority of the Designated Router.
BSR Border: This field indicates the bootstrap router border interface. Possible values are enabled
or disabled.
9.6.1.4 show ip pimsm neighbor
This command displays the neighbor information for PIM-SM on the specified interface.
Syntax
show ip pimsm neighbor [<slot/port> | all]
<slot/port> - Interface number.
all - this command represents all interfaces.
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
Interface: Valid slot and port number separated by forward slashes.