Fortinet 548B - Manual (Page 514)

- 514 -
User Exec
Display Message
Admin Mode: This field displays the administrative status of multicast. This is a configured value.
Protocol State: This field indicates the current state of the multicast protocol. Possible values are
Operational or Non-Operational.
Table Max Size: This field displays the maximum number of entries allowed in the multicast table.
Protocol: This field displays the multicast protocol running on the router. Possible values are
PIMDM, PIMSM, or DVMRP.
Forwarding Multicast Stream Entry Count: This field displays the number of entries in the
multicast table.
9.4.1.2 show ip mcast boundary
This command displays all the configured administrative scoped multicast boundaries.
Syntax
show ip mcast boundary {<slot/port> | all}
<slot/port > - Interface number.
all - This command represents all interfaces.
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
Interface: Valid slot and port number separated by forward slashes.
Group IP: The group IP address.
Mask: The group IP mask.
9.4.1.3 show ip mcast interface
This command displays the multicast information for the specified interface.
Syntax
show ip mcast interface <slot/port>