Fortinet 548B - Manual (Page 149)

- 149 -
The user can go to the CLI Global Configuration Mode to configure the Ether Type of CN-TAG. Use the
‘congestion-notify tag ethertype <value>’ global configuration command. Use the ‘no congestion-notify
tag ethertype’ to configure CN-TAG Ether Type to default value..
Syntax
congestion-notify tag ethertype <0-65535>
Default Setting
0x22e9
Command Mode
Global Config
7.2.18.5 congestion-notify enable
The user can go to the CLI Global Configuration Mode to enable handling congestion notification
message. Use the ‘congestion-notify enable’ global configuration command. Use the ‘no
congestion-
notify enable’ to disable handling congestion notification message.
Syntax
congestion-notify enable
no congestion-notify enable
no - This command disables handling congestion notification message.
Default Setting
Disabled
Command Mode
Global Config
7.2.18.6 congestion-notify msg
The user can go to the CLI Global Configuration Mode to configure the Ether Type of CNM. Use the
‘congestion-notify msg ethertype <value>’ global configuration command. Use the ‘no congestion-notify
msg ethertype’ to configure CNM Ether Type to default value.