Fortinet 548B - Manual (Page 138)

- 138 -
Command Mode
Interface Config
7.2.15 Port Backup
7.2.15.1 show port backup
Show port-backup information.
Syntax
show port-backup
Command Mode
Privileged EXEC
Display Message
Admin Mode: Indicates whether or not port-backup is active on the switch.
Group ID: The Group ID for each displayed row.
Mode: Indicates whether or not the group is active.
MAC Update: Indicates whether or not mac-move-update is enable on the group.
Active Port: Display the active port number.
Backup Port: Display the active port number.
Current Active Port: Display the current active port number.
7.2.15.2 port-backup
Enable/Disable the port backup admin mode. Use ‘port-backup’ to enable the admin mode of function,
and use no command to disable the function.
Create/Destroy the port backup group. Use ‘port-backup group’ to create a group. Use no command to
destroy the group.
Enable/Disable a port- backup group. Use ‘port-backup group enable <group id> to enable individual
group, and use no command to disable a group.
Enable/Disable a port-backup group support the mac-move-update . Use ‘port-backup group <group id>
mac-move-update to enable individual group, and use no command to disable a group.
Syntax
port-backup [group | {enable <1 - 6>| <1 - 6> [failback-time <0 - 60>| mac-move-update]}]
no port-backup [group | {enable <1 - 6>| <1 - 6> [failback-time <0 - 60>| mac-move-update]}]