Fortinet 548B - Manual (Page 947)

- 947 -
Register Threshold Rate - The minimum source data rate in K bits/second above which the
Rendezvous Point router will switch to a source-specific shortest path tree.
Command Buttons
Refresh - Refresh the data on the screen with the present state of the data in the router.
11.8.5.3 Configuring PIM-SM SSM Range Configuration Page
Configurable Data
SSM Group Address - Enter the source-specific multicast group ip-address.
SSM Group Mask - Enter the source-specific multicast group ip-address mask.
Command Buttons
Submit - Send the updated configuration to the router. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a save is performed.
Refresh - Refresh the data on the screen with the present state of the data in the router.
11.8.5.4 Configuring Interface’s PIM-SM Configuration Page