Fortinet 548B - Manual (Page 300)

- 300 -
no lldp med confignotification all
Default Setting
None
Command Mode
Global Config
7.12.2.14 lldp med faststartrepeatcount
The user can go to the CLI Global Configuration Mode to set the fast start repeat count, use the lldp
med faststartrepeatcount Global configuration command. Use the no lldp med faststartrepeatcount
to return the default value 3.
Syntax
lldp med faststartrepeatcount <1-10>
no lldp med faststartrepeatcount
Default Setting
3
Command Mode
Global Config
7.12.2.15 lldp med transmit-tlv all
The user can go to the CLI Global Configuration Mode to set Type Length Values (TLVs) in the
LLDP-MED, use the lldp med transmit-tlv all [capabilities] [ex-pd] [ex-pse] [inventory][location]
[network-policy]Global configuration command. Use the no lldp med transmit-tlv all [capabilities]
[ex-pd] [ex-pse] [inventory] [location] [network-policy] to remove Type Length Values (TLVs) in the
LLDP-MED
Syntax
lldp med transmit-tlv all [capabilities] [ex-pd] [ex-pse] [inventory] [location] [network-policy]
no lldp med transmit-tlv all [capabilities] [ex-pd] [ex-pse] [inventory] [location] [network-policy]
capabilities - Transmit the LLDP capabilities TLV.
ex-pd - Transmit the LLDP extended PD TLV.
ex-pse - Transmit the LLDP extended PSE TLV.
inventory - Transmit the LLDP inventory TLV.