Document Outline

• 1. Introduction
  • 1.1 Scope
  • 1.2 Documentation
    • 1.2.1 Fortinet Knowledge Base
    • 1.2.2 Comments on Fortinet Technical Documentation
  • 1.3 Customer Service and Technical Support
  • 1.4 Training
• 2. Product Overview
  • 2.1 Switch Description
  • 2.2 Features
  • 2.3 Front-Panel Components
  • 2.4 LED Indicators
  • 2.5 Rear Panel Description
  • 2.6 Management Options
  • 2.7 Web-based Management Interface
  • 2.8 Command Line Console Interface Through the Serial Port or Telnet
  • 2.9 SNMP-Based Management
• 3. Installation and Quick Startup
  • 3.1 Package Contents
  • 3.2 Switch Installation
  • 3.3 Installing the Switch in a Rack
  • 3.4 Quick Starting the Switch
  • 3.5 System Information Setup
    • 3.5.1 Quick Start up Software Version Information
    • 3.5.2 Quick Start up Physical Port Data
    • 3.5.3 Quick Start up User Account Management
    • 3.5.4 Quick Start up IP Address
    • 3.5.5 Quick Start up Uploading from Switch to Out-of-Band PC
    • 3.5.6 Quick Start up Downloading from Out-of-Band PC to Switch
    • 3.5.7 Quick Start up Downloading from TFTP Server
    • 3.5.8 Quick Start up Factory Defaults
• 4. Console and Telnet Administration Interface
  • 4.1 Local Console Management
  • 4.2 Set Up your Switch Using Console Access
  • 4.3 Set Up your Switch Using Telnet Access
• 5. Web-Based Management Interface
  • 5.1 Overview
  • 5.2 How to log in
  • 5.3 Web-Based Management Menu
• 6. Command Line Interface Structure and Mode-based CLI
  • 6.1 CLI Command Format
  • 6.2 CLI Mode-based Topology
• 7. Switching Commands
  • le
  • 7.1 System Information and Statistics commands
    • 7.1.1 show arp
    • 7.1.2 show calendar
    • 7.1.3 show process cpu
    • 7.1.4 show eventlog
    • 7.1.5 show running-config
    • 7.1.6 show sysinfo
    • 7.1.7 show system
    • 7.1.8 show tech-support
    • 7.1.9 show hardware
    • 7.1.10 show version
    • 7.1.11 show loginsession
    • 7.1.12 show command filter
  • 7.2 Device Configuration Commands
    • 7.2.1 Interface
      • 7.2.1.1 show interface status
      • 7.2.1.2 show interface counters
      • 7.2.1.3 show interface switch
      • 7.2.1.4 interface
      • 7.2.1.5 speed-duplex
      • 7.2.1.6 negotiate
      • 7.2.1.7 capabilities
      • 7.2.1.8 storm-control flowcontrol
      • 7.2.1.9 storm-control flowcontrol pfc
      • 7.2.1.10 shutdown
      • 7.2.1.11 description
      • 7.2.1.12 mdi
    • 7.2.2 L2 MAC Address and Multicast Forwarding Database Tables
      • 7.2.2.1 show mac-addr-table
      • 7.2.2.2 show mac-addr-table count
      • 7.2.2.3 show mac-addr-table interface
      • 7.2.2.4 show mac-addr-table vlan
      • 7.2.2.5 show mac-address-table gmrp
      • 7.2.2.6 show mac-address-table igmpsnooping
      • 7.2.2.7 show mac-address-table multicast
      • 7.2.2.8 show mac-address-table stats
      • 7.2.2.9 show mac-addr-table agetime
      • 7.2.2.10 mac-address-table aging-time
    • 7.2.3 VLAN Management
      • 7.2.3.1 show vlan
      • 7.2.3.2 show vlan id
      • 7.2.3.3 show vlan association mac
      • 7.2.3.4 show vlan association subnet
      • 7.2.3.5 show protocol group
      • 7.2.3.6 show interface switchport
      • 7.2.3.7 vlan database
      • 7.2.3.8 vlan
      • 7.2.3.9 vlan name
      • 7.2.3.10 vlan association mac
      • 7.2.3.11 vlan association subnet
      • 7.2.3.12 vlan makestatic
      • 7.2.3.13 protocol group
      • 7.2.3.14 switchport acceptable-frame-type
      • 7.2.3.15 switchport ingress-filtering
      • 7.2.3.16 switchport native vlan
      • 7.2.3.17 switchport allowed vlan
      • 7.2.3.18 switchport tagging
      • 7.2.3.19 switchport forbidden vlan
      • 7.2.3.20 switchport priority
      • 7.2.3.21 switchport protocol group
    • 7.2.4 Double VLAN commands
      • 7.2.4.1 show dvlan-tunnel/ dot1q-tunnel
      • 7.2.4.2 switchport dvlan-tunnel/ dot1q-tunnel ethertype
      • 7.2.4.3 switchport dvlan-tunnel/ dot1q-tunnel
    • 7.2.5 GVRP and Bridge Extension
      • 7.2.5.1 show bridge-ext
      • 7.2.5.2 show gvrp configuration
      • 7.2.5.3 show gmrp configuration
      • 7.2.5.4 show garp configuration
      • 7.2.5.5 bridge-ext gvrp
      • 7.2.5.6 bridge-ext gmrp
      • 7.2.5.7 switchport gvrp
      • 7.2.5.8 switchport gmrp
      • 7.2.5.9 garp timer
    • 7.2.6 IGMP Snooping
      • 7.2.6.1 ip igmp snooping
      • 7.2.6.2 ip igmp snooping interfacemode
      • 7.2.6.3 ip igmp snooping fast-leave
      • 7.2.6.4 ip igmp snooping groupmembershipinterval
      • 7.2.6.5 ip igmp snooping max-response-time
      • 7.2.6.6 ip igmp snooping mcrtrexpiretime
      • 7.2.6.7 ip igmp snooping mrouter interface
      • 7.2.6.8 set igmp
      • 7.2.6.9 set igmp fast-leave
      • 7.2.6.10 set igmp groupmembership-interval
      • 7.2.6.11 set igmp maxresponse
      • 7.2.6.12 set igmp mcrtrexpiretime
      • 7.2.6.13 ip igmp snooping static
      • 7.2.6.14 show ip igmp snooping
      • 7.2.6.15 show ip igmp snooping mrouter interface
      • 7.2.6.16 show ip igmp snooping mrouter vlan
      • 7.2.6.17 show ip igmp snooping static
      • 7.2.6.18 show mac-address-table igmpsnooping
    • 7.2.7 IGMP Snooping Querier
      • 7.2.7.1 ip igmp snooping querier
      • 7.2.7.2 ip igmp snooping querier address
      • 7.2.7.3 ip igmp snooping querier query-interval
      • 7.2.7.4 ip igmp snooping querier querier-expiry-interval
      • 7.2.7.5 ip igmp snooping querier version
      • 7.2.7.6 ip igmp snooping querier vlan
      • 7.2.7.7 ip igmp snooping querier vlan address
      • 7.2.7.8 ip igmp snooping querier vlan election participate
      • 7.2.7.9 show ip igmp snooping querier
      • 7.2.7.10 show ip igmp snooping querier vlan
      • 7.2.7.11 show ip igmp snooping querier detail
    • 7.2.8 MLD Snooping
      • 7.2.8.1 show ipv6 mld snooping
      • 7.2.8.2 show ipv6 mld snooping mrouter interface
      • 7.2.8.3 show ipv6 mld snooping mrouter vlan
      • 7.2.8.4 show ipv6 mld snooping static
      • 7.2.8.5 show mac-address-table mldsnooping
      • 7.2.8.6 ipv6 mld snooping
      • 7.2.8.7 clear mld snooping
      • 7.2.8.8 ipv6 mld snooping interfacemode
      • 7.2.8.9 ipv6 mld snooping fast-leave
      • 7.2.8.10 ipv6 mld snooping groupmembershipinterval
      • 7.2.8.11 ipv6 mld snooping max-response-time
      • 7.2.8.12 ipv6 mld snooping mcrtrexpiretime
      • 7.2.8.13 ipv6 mld snooping mrouter interface
      • 7.2.8.14 ipv6 mld snooping static
      • 7.2.8.15 set mld
      • 7.2.8.16 set mld fast-leave
      • 7.2.8.17 set mld groupmembership-interval
      • 7.2.8.18 set mld maxresponse
      • 7.2.8.19 set ipv6 mld mcrtrexpiretime
    • 7.2.9 MLD Snooping Querier
      • 7.2.9.1 show ipv6 mld snooping querier
      • 7.2.9.2 show ipv6 mld snooping querier vlan
      • 7.2.9.3 show ipv6 mld snooping querier detail
      • 7.2.9.4 ipv6 mld snooping querier
      • 7.2.9.5 ipv6 mld snooping querier address
      • 7.2.9.6 ipv6 mld snooping querier querier-interval
      • 7.2.9.7 ipv6 mld snooping querier querier-expiry-interval
      • 7.2.9.8 ipv6 mld snooping querier vlan
      • 7.2.9.9 ipv6 mld snooping querier vlan address
      • 7.2.9.10 ipv6 mld snooping querier vlan election participate
    • 7.2.10 Port Channel
      • 7.2.10.1 show port-channel
      • 7.2.10.2 port-channel
      • 7.2.10.3 port-channel adminmode all
      • 7.2.10.4 staticcapability
      • 7.2.10.5 port-channel linktrap
      • 7.2.10.6 port-channel load-balance
      • 7.2.10.7 port-channel name
      • 7.2.10.8 port-channel system priority
      • 7.2.10.9 adminmode
      • 7.2.10.10 lacp
      • 7.2.10.11 lacp actor or lacp partner
      • 7.2.10.12 channel-group
      • 7.2.10.13 delete-channel-group
    • 7.2.11 Storm Control
      • 7.2.11.1 show storm-control
      • 7.2.11.2 storm-control broadcast
      • 7.2.11.3 storm-control multicast
      • 7.2.11.4 storm-control unicast
      • 7.2.11.5 switchport broadcast packet-rate
      • 7.2.11.6 switchport multicast packet-rate
      • 7.2.11.7 switchport unicast packet-rate
    • 7.2.12 L2 Priority
      • 7.2.12.1 show queue cos-map
      • 7.2.12.2 queue cos-map
    • 7.2.13 Port Mirror
      • 7.2.13.1 show port-monitor session
      • 7.2.13.2 port-monitor session
      • 7.2.13.3 port-monitor session mode
    • 7.2.14 Link State
      • 7.2.14.1 show link state
      • 7.2.14.2 link state
      • 7.2.14.3 link state group
    • 7.2.15 Port Backup
      • 7.2.15.1 show port backup
      • 7.2.15.2 port-backup
      • 7.2.15.3 port-backup group
    • 7.2.16 FIP Snooping
      • 7.2.16.1 show fip-snooping
      • 7.2.16.2 show fip-snooping enode
      • 7.2.16.3 show fip-snooping session
      • 7.2.16.4 show fip-snooping fcf
      • 7.2.16.5 show fip-snooping vlan
      • 7.2.16.6 fip-snooping
      • 7.2.16.7 fip-snooping vlan
    • 7.2.17 Enhanced Transmission Selection (ETS)
      • 7.2.17.1 show queue ets
      • 7.2.17.2 show queue ets scheduler-type
      • 7.2.17.3 show queue ets weight
      • 7.2.17.4 show queue ets pg-mapping
      • 7.2.17.5 queue ets
      • 7.2.17.6 queue ets scheduler-type
      • 7.2.17.7 queue ets weight
      • 7.2.17.8 queue ets pg-mapping
    • 7.2.18 Congestion Notification
      • 7.2.18.1 show congestion-notify
      • 7.2.18.2 show congestion-notify interface
      • 7.2.18.3 congestion-notify priority
      • 7.2.18.4 congestion-notify tag
      • 7.2.18.5 congestion-notify enable
      • 7.2.18.6 congestion-notify msg
      • 7.2.18.7 congestion-notify CPID
      • 7.2.18.8 congestion-notify outer
      • 7.2.18.9 congestion-notify inner
      • 7.2.18.10 congestion-notify no-generate
  • 7.3 Management Commands
    • 7.3.1 Network Commands
      • 7.3.1.1 show ip interface
      • 7.3.1.2 show ip filter
      • 7.3.1.3 mtu
      • 7.3.1.4 interface vlan
      • 7.3.1.5 ip address
      • 7.3.1.6 ip default-gateway
      • 7.3.1.7 ip address protocol
      • 7.3.1.8 ip filter
    • 7.3.2 Serial Interface Commands
      • 7.3.2.1 show line console
      • 7.3.2.2 line console
      • 7.3.2.3 baudrate
      • 7.3.2.4 exec-timeout
      • 7.3.2.5 password-threshold
      • 7.3.2.6 silent-time
      • 7.3.2.7 terminal length
    • 7.3.3 Telnet Session Commands
      • 7.3.3.1 telnet
      • 7.3.3.2 show line vty
      • 7.3.3.3 line vty
      • 7.3.3.4 exec-timeout
      • 7.3.3.5 password-threshold
      • 7.3.3.6 terminal length
      • 7.3.3.7 maxsessions
      • 7.3.3.8 server enable
      • 7.3.3.9 sessions
      • 7.3.3.10 telnet sessions
      • 7.3.3.11 telnet maxsessions
      • 7.3.3.12 telnet exec-timeout
      • 7.3.3.13 show telnet
    • 7.3.4 SSH Client Session Commands
      • 7.3.4.1 ssh
      • 7.3.4.2 sshc sessions
      • 7.3.4.3 sshc maxsessions
      • 7.3.4.4 sshc exec-timeout
      • 7.3.4.5 show sshc
    • 7.3.5 SNMP Server Commands
      • 7.3.5.1 show snmp
      • 7.3.5.2 show trapflags
      • 7.3.5.3 snmp-server sysname
      • 7.3.5.4 snmp-server location
      • 7.3.5.5 snmp-server contact
      • 7.3.5.6 snmp-server community
      • 7.3.5.7 snmp-server community ipaddr
      • 7.3.5.8 snmp-server enable traps
    • 7.3.6 SNMP Trap Commands
      • 7.3.6.1 show snmptrap
      • 7.3.6.2 snmptrap snmpversion
      • 7.3.6.3 snmp trap link-status
      • 7.3.6.4 snmptrap <name> ipaddr <ipaddr> <snmpversion>
      • 7.3.6.5 snmptrap ipaddr <name> <ipaddr> <ipaddrnew>
      • 7.3.6.6 snmptrap mode
    • 7.3.7 HTTP commands
      • 7.3.7.1 show ip http
      • 7.3.7.2 ip javamode
      • 7.3.7.3 ip http port
      • 7.3.7.4 ip http server
      • 7.3.7.5 ip http secure-port
      • 7.3.7.6 ip http secure-server
      • 7.3.7.7 ip http secure-protocol
    • 7.3.8 Secure Shell (SSH) Commands
      • 7.3.8.1 show ip ssh
      • 7.3.8.2 ip ssh
      • 7.3.8.3 ip ssh protocol
      • 7.3.8.4 ip ssh maxsessions
      • 7.3.8.5 ip ssh timeout
    • 7.3.9 Management Security Commands
      • 7.3.9.1 crypto certificate generate
      • 7.3.9.2 crypto key generate
    • 7.3.10 DHCP Client Commands
      • 7.3.10.1 ip dhcp restart
      • 7.3.10.2 ip dhcp client-identifier
    • 7.3.11 DHCPv6 Client Commands
      • 7.3.11.1 ipv6 address protocol
      • 7.3.11.2 ipv6 dhcp restart
      • 7.3.11.3 serviceport protocol
      • 7.3.11.4 serviceport protocol dhcp6 restart
    • 7.3.12 DHCP Relay Commands
      • 7.3.12.1 show bootpdhcprelay
      • 7.3.12.2 bootpdhcprelay maxhopcount
    • 7.3.13 sFlow Commands
      • 7.3.13.1 show sflow agent
      • 7.3.13.2 show sflow pollers
      • 7.3.13.3 show sflow receivers
      • 7.3.13.4 show sflow samplers
      • 7.3.13.5 set sflow rate
      • 7.3.13.6 set sflow maximum header size
      • 7.3.13.7 set sflow maximum datagram size
      • 7.3.13.8 set sflow receiver address
      • 7.3.13.9 set sflow receiver port
      • 7.3.13.10 set sflow interval
      • 7.3.13.11 set sflow sampler index
      • 7.3.13.12 set sflow poller index
    • 7.3.14 Service Port Commands
      • 7.3.14.1 show serviceport
      • 7.3.14.2 show serviceport ndp
      • 7.3.14.3 serviceport ip
      • 7.3.14.4 serviceport protocol
      • 7.3.14.5 serviceport ipv6 enable
      • 7.3.14.6 serviceport ipv6 address
      • 7.3.14.7 serviceport ipv6 gateway
  • 7.4 Spanning Tree Commands
    • 7.4.1 Show Commands
      • 7.4.1.1 show spanning-tree
      • 7.4.1.2 show spanning-tree interface
      • 7.4.1.3 show spanning-tree vlan
      • 7.4.1.4 show spanning-tree mst
      • 7.4.1.5 show spanning-tree summary
      • 7.4.1.6 show spanning-tree brief
    • 7.4.2 Configuration Commands
      • 7.4.2.1 spanning-tree
      • 7.4.2.2 spanning-tree protocol-migration
      • 7.4.2.3 spanning-tree configuration
      • 7.4.2.4 spanning-tree mode
      • 7.4.2.5 spanning-tree forward-time
      • 7.4.2.6 spanning-tree hello-time
      • 7.4.2.7 spanning-tree max-age
      • 7.4.2.8 spanning-tree max-hops
      • 7.4.2.9 spanning-tree hold-count
      • 7.4.2.10 spanning-tree mst
      • 7.4.2.11 spanning-tree port mode
      • 7.4.2.12 spanning-tree auto-edge
      • 7.4.2.13 spanning-tree edgeport
      • 7.4.2.14 spanning-tree uplinkfast
      • 7.4.2.15 spanning-tree guard {loop|none|root}
      • 7.4.2.16 spanning-tree tcnguard
  • 7.5 System Log Management Commands
    • 7.5.1 Show Commands
      • 7.5.1.1 show logging
      • 7.5.1.2 show logging buffered
      • 7.5.1.3 show logging traplog
      • 7.5.1.4 show logging hosts
    • 7.5.2 Configuration Commands
      • 7.5.2.1 logging buffered
      • 7.5.2.2 logging console
      • 7.5.2.3 logging monitor
      • 7.5.2.4 terminal monitor
      • 7.5.2.5 logging host
      • 7.5.2.6 logging syslog
      • 7.5.2.7 clear logging buffered
  • 7.6 Script Management Commands
    • 7.6.1 script apply
    • 7.6.2 script delete
      • 7.6.2.1 script list
    • 7.6.3 script show
    • 7.6.4 script validate
  • 7.7 User Account Management Commands
    • 7.7.1 Show Commands
      • 7.7.1.1 show users
      • 7.7.1.2 show users account information
      • 7.7.1.3 show passwords configuration
    • 7.7.2 Configuration Commands
      • 7.7.2.1 username
      • 7.7.2.2 Unlock a locked user account
      • 7.7.2.3 username snmpv3 authentication
      • 7.7.2.4 username snmpv3 encryption
      • 7.7.2.5 Set the password aging
      • 7.7.2.6 Set the password history
      • 7.7.2.7 Set the password lock-out count
      • 7.7.2.8 Set the minimum password length
  • 7.8 Security Commands
    • 7.8.1 Show Commands
      • 7.8.1.1 show users authentication
      • 7.8.1.2 show authentication
      • 7.8.1.3 show authentication users
      • 7.8.1.4 show dot1x
      • 7.8.1.5 show dot1x detail
      • 7.8.1.6 show dot1x statistics
      • 7.8.1.7 show dot1x summary
      • 7.8.1.8 show dot1x users
      • 7.8.1.9 show dot1x client
      • 7.8.1.10 show radius servers
      • 7.8.1.11 show radius
      • 7.8.1.12 show radius accounting
      • 7.8.1.13 show radius statistics
      • 7.8.1.14 show tacacs
      • 7.8.1.15 show port-security
    • 7.8.2 Configuration Commands
      • 7.8.2.1 authentication login
      • 7.8.2.2 username defaultlogin
      • 7.8.2.3 username login
    • 7.8.3 Dot1x Configuration Commands
      • 7.8.3.1 dot1x initialize
      • 7.8.3.2 dot1x default-login
      • 7.8.3.3 dot1x login
      • 7.8.3.4 dot1x system-auth-control
      • 7.8.3.5 dot1x user
      • 7.8.3.6 dot1x port-control
      • 7.8.3.7 dot1x max-req
      • 7.8.3.8 dot1x max-user
      • 7.8.3.9 dot1x re-authentication
      • 7.8.3.10 dot1x re-reauthenticate
      • 7.8.3.11 dot1x timeout
      • 7.8.3.12 dot1x guest vlan
    • 7.8.4 Radius Configuration Commands
      • 7.8.4.1 radius accounting mode
      • 7.8.4.2 authorization network radius
      • 7.8.4.3 radius server attribute 4
      • 7.8.4.4 radius-server dead-time
      • 7.8.4.5 radius-server host
      • 7.8.4.6 radius-sever key
      • 7.8.4.7 radius-server retransmit
      • 7.8.4.8 radius-server timeout
      • 7.8.4.9 radius-server msgauth
      • 7.8.4.10 radius-server primary
    • 7.8.5 TACACS+ Configuration Commands
      • 7.8.5.1 tacacs host
      • 7.8.5.2 tacacs key
      • 7.8.5.3 tacacs timeout
    • 7.8.6 Port Security Configuration Commands
      • 7.8.6.1 port-security
      • 7.8.6.2 port-security max-dynamic
      • 7.8.6.3 port-security max-static
      • 7.8.6.4 port-security mac-address
      • 7.8.6.5 port-security mac-address move
      • 7.8.6.6 port-security violation shutdown
  • 7.9 CDP (Cisco Discovery Protocol) Commands
    • 7.9.1 Show Commands
      • 7.9.1.1 show cdp
      • 7.9.1.2 show cdp neighbors
      • 7.9.1.3 show cdp neighbors detail
      • 7.9.1.4 show cdp traffic
    • 7.9.2 Configuration Commands
      • 7.9.2.1 cdp
      • 7.9.2.2 cdp run
      • 7.9.2.3 cdp timer
      • 7.9.2.4 cdp holdtime
  • 7.10 SNTP (Simple Network Time Protocol) Commands
    • 7.10.1 Show Commands
      • 7.10.1.1 show sntp
    • 7.10.2 Configuration Commands
      • 7.10.2.1 sntp broadcast client poll-interval
      • 7.10.2.2 sntp client mode
      • 7.10.2.3 sntp client port
      • 7.10.2.4 sntp unicast client poll-interval
      • 7.10.2.5 sntp unicast client poll-timeout
      • 7.10.2.6 sntp unicast client poll-retry
      • 7.10.2.7 sntp server
      • 7.10.2.8 sntp clock timezone
      • 7.10.2.9 sntp multicast client poll-internal
  • 7.11 MAC-Based Voice VLAN Commands
    • 7.11.1 Show Commands
      • 7.11.1.1 show voice-vlan
      • 7.11.1.2 show voice vlan
    • 7.11.2 Configuration Commands
      • 7.11.2.1 voice-vlan
      • 7.11.2.2 voice-vlan vlan
      • 7.11.2.3 voice-vlan mac
      • 7.11.2.4 voice vlan
      • 7.11.2.5 voice vlan data priority
  • 7.12 LLDP (Link Layer Discovery Protocol) Commands
    • 7.12.1 Show Commands
      • 7.12.1.1 show lldp
      • 7.12.1.2 show lldp interface
      • 7.12.1.3 show lldp statistics
      • 7.12.1.4 show lldp remote-device
      • 7.12.1.5 show lldp remote-device detail
      • 7.12.1.6 show lldp local-device
      • 7.12.1.7 show lldp local-device detail
      • 7.12.1.8 show lldp med
      • 7.12.1.9 show lldp med interface
      • 7.12.1.10 show lldp med local-device detail
      • 7.12.1.11 show lldp med remote-device
      • 7.12.1.12 show lldp med remote-device detail
    • 7.12.2 Configuration Commands
      • 7.12.2.1 lldp notification
      • 7.12.2.2 lldp notification-interval
      • 7.12.2.3 lldp receive
      • 7.12.2.4 lldp transmit
      • 7.12.2.5 lldp transmit-mgmt
      • 7.12.2.6 lldp transmit-tlv
      • 7.12.2.7 lldp timers
      • 7.12.2.8 lldp tx-delay
      • 7.12.2.9 lldp med
      • 7.12.2.10 lldp med confignotification
      • 7.12.2.11 lldp med transmit-tlv
      • 7.12.2.12 lldp med all
      • 7.12.2.13 lldp med confignotification all
      • 7.12.2.14 lldp med faststartrepeatcount
      • 7.12.2.15 lldp med transmit-tlv all
  • 7.13 Denial Of Service Commands
    • 7.13.1 Show Commands
      • 7.13.1.1 show dos-control
    • 7.13.2 Configuration Commands
      • 7.13.2.1 dos-control sipdip
      • 7.13.2.2 dos-control tcpfrag
      • 7.13.2.3 dos-control firstfrag
      • 7.13.2.4 dos-control tcpflag
      • 7.13.2.5 dos-control l4port
      • 7.13.2.6 dos-control tcpport
      • 7.13.2.7 dos-control udpport
      • 7.13.2.8 dos-control icmp
      • 7.13.2.9 dos-control icmpv4
      • 7.13.2.10 dos-control icmpv6
      • 7.13.2.11 dos-control icmpfrag
      • 7.13.2.12 dos-control smacdmac
      • 7.13.2.13 dos-control tcpfinurgpsh
      • 7.13.2.14 dos-control tcpsyn
      • 7.13.2.15 dos-control tcpsynfin
      • 7.13.2.16 dos-control tcpoffset
      • 7.13.2.17 dos-control all
  • 7.14 VTP (VLAN Trunking Protocol) Commands
    • 7.14.1 Show Commands
      • 7.14.1.1 show vtp counters
      • 7.14.1.2 show vtp password
      • 7.14.1.3 show vtp status
      • 7.14.1.4 show vtp trunkport
    • 7.14.2 Configuration Commands
      • 7.14.2.1 vtp
      • 7.14.2.2 vtp domain
      • 7.14.2.3 vtp mode
      • 7.14.2.4 vtp version
      • 7.14.2.5 vtp password
      • 7.14.2.6 vtp pruning
      • 7.14.2.7 vtp trunkport
  • 7.15 Protected Ports Commands
    • 7.15.1 Show Commands
      • 7.15.1.1 show switchport protected
      • 7.15.1.2 show interface switchport protected
    • 7.15.2 Configuration Commands
      • 7.15.2.1 switchport protected
  • 7.16 Static MAC Filtering Commands
    • 7.16.1 Show Commands
      • 7.16.1.1 show mac-address-table static
    • 7.16.2 Configuration Commands
      • 7.16.2.1 macfilter
      • 7.16.2.2 macfilter addsrc
      • 7.16.2.3 macfilter addsrc all
  • 7.17 System Utilities
    • 7.17.1 clear
      • 7.17.1.1 clear arp
      • 7.17.1.2 clear traplog
      • 7.17.1.3 clear eventlog
      • 7.17.1.4 clear logging buffered
      • 7.17.1.5 clear config
      • 7.17.1.6 clear pass
      • 7.17.1.7 clear counters
      • 7.17.1.8 clear dns
      • 7.17.1.9 clear cdp
      • 7.17.1.10 clear vlan
      • 7.17.1.11 clear igmpsnooping
      • 7.17.1.12 clear port-channel
      • 7.17.1.13 clear ip filter
      • 7.17.1.14 clear dot1x statistics
      • 7.17.1.15 clear radius statistics
      • 7.17.1.16 clear domain-list
      • 7.17.1.17 clear hosts
      • 7.17.1.18 clear port-security dynamic address
      • 7.17.1.19 clear ip arp-cache
      • 7.17.1.20 clear lldp statistics
      • 7.17.1.21 clear lldp remote-data
      • 7.17.1.22 enable passwd
      • 7.17.1.23 enable passwd encrypted
      • 7.17.1.24 clear ipv6 neighbors
      • 7.17.1.25 clear ipv6 statistics
      • 7.17.1.26 clear ipv6 dhcp
    • 7.17.2 copy
    • 7.17.3 delete
    • 7.17.4 dir
    • 7.17.5 whichboot
    • 7.17.6 boot-system
    • 7.17.7 ping
      • 7.17.7.1 ping <ipaddress|host>
      • 7.17.7.2 ping ipv6 <ipv6-address|hostname>
      • 7.17.7.3 ping ipv6 interface
    • 7.17.8 traceroute
      • 7.17.8.1 traceroute
      • 7.17.8.2 traceroute ipv6
    • 7.17.9 logging cli-command
    • 7.17.10 calendar set
    • 7.17.11 reload
    • 7.17.12 configure
    • 7.17.13 disconnect
    • 7.17.14 hostname
    • 7.17.15 quit
    • 7.17.16 cablestatus
  • 7.18 DHCP Snooping Commands
    • 7.18.1 Show Commands
      • 7.18.1.1 show ip dhcp snooping
      • 7.18.1.2 show ip dhcp snooping binding
      • 7.18.1.3 show ip dhcp snooping database
      • 7.18.1.4 show ip dhcp snooping statistics
    • 7.18.2 Configuration Commands
      • 7.18.2.1 ip dhcp snooping
      • 7.18.2.2 ip dhcp snooping vlan
      • 7.18.2.3 ip dhcp snooping verify mac-address
      • 7.18.2.4 ip dhcp snooping database
      • 7.18.2.5 ip dhcp snooping database write-delay
      • 7.18.2.6 ip dhcp snooping database timeout
      • 7.18.2.7 ip dhcp snooping binding
      • 7.18.2.8 ip dhcp snooping limit
      • 7.18.2.9 ip dhcp snooping log-invalid
      • 7.18.2.10 ip dhcp snooping trust
      • 7.18.2.11 ip dhcp snooping information option
      • 7.18.2.12 ip dhcp snooping information option allow-untrusted
  • 7.19 IP Source Guard (IPSG) Commands
    • 7.19.1 Show Commands
      • 7.19.1.1 show ip verify
      • 7.19.1.2 show ip verify source
      • 7.19.1.3 show ip source binding
    • 7.19.2 Configuration Commands
      • 7.19.2.1 ip verify source
      • 7.19.2.2 ip verify binding
  • 7.20 Dynamic ARP Inspection (DAI) Command
    • 7.20.1 Show Commands
      • 7.20.1.1 show ip arp inspection statistics
      • 7.20.1.2 show ip arp inspection
      • 7.20.1.3 show ip arp inspection interfaces
      • 7.20.1.4 show arp access-list
    • 7.20.2 Configuration Commands
      • 7.20.2.1 ip arp inspection validate
      • 7.20.2.2 ip arp inspection vlan
      • 7.20.2.3 ip arp inspection vlan logging
      • 7.20.2.4 ip arp inspection filter
      • 7.20.2.5 ip arp inspection trust
      • 7.20.2.6 ip arp inspection limit
      • 7.20.2.7 arp access-list
      • 7.20.2.8 permit ip host mac host
      • 7.20.2.9 clear ip arp inspection statistics
  • 7.21 Differentiated Service Command
    • le
    • 7.21.1 General Commands
      • 7.21.1.1 diffserv
      • 7.21.1.2 no diffserv
    • 7.21.2 Class Commands
      • 7.21.2.1 class-map
      • 7.21.2.2 no class-map
      • 7.21.2.3 class-map rename
      • 7.21.2.4 match any
      • 7.21.2.5 match class-map
      • 7.21.2.6 no match class-map
      • 7.21.2.7 match cos
      • 7.21.2.8 match destination-address mac
      • 7.21.2.9 match dstip
      • 7.21.2.10 match dstl4port
      • 7.21.2.11 match ethertype
      • 7.21.2.12 match ip dscp
      • 7.21.2.13 match ip precedence
      • 7.21.2.14 match ip tos
      • 7.21.2.15 match protocol
      • 7.21.2.16 match source-address mac
      • 7.21.2.17 match srcip
      • 7.21.2.18 match srcl4port
      • 7.21.2.19 match vlan
      • 7.21.2.20 match dstip6
      • 7.21.2.21 match srcip6
      • 7.21.2.22 match ip6flowlbl
    • 7.21.3 Policy Commands
      • 7.21.3.1 assign-queue
      • 7.21.3.2 drop
      • 7.21.3.3 mirror
      • 7.21.3.4 redirect
      • 7.21.3.5 conform-color
      • 7.21.3.6 mark cos
      • 7.21.3.7 class
      • 7.21.3.8 no class
      • 7.21.3.9 mark ip-dscp
      • 7.21.3.10 mark ip-precedence
      • 7.21.3.11 police-simple
      • 7.21.3.12 policy-map
      • 7.21.3.13 policy-map rename
    • 7.21.4 Service Commands
      • 7.21.4.1 service-policy
      • 7.21.4.2 no service-policy
    • 7.21.5 Show Commands
      • 7.21.5.1 show class-map
      • 7.21.5.2 show diffserv
      • 7.21.5.3 show diffserv service
      • 7.21.5.4 show diffserv service brief
      • 7.21.5.5 show policy-map
      • 7.21.5.6 show policy-map interface
      • 7.21.5.7 show service-policy
  • 7.22 ACL Command
    • 7.22.1 Show Commands
      • 7.22.1.1 show mac access-lists name
      • 7.22.1.2 show mac access-lists
      • 7.22.1.3 show ip access-lists
      • 7.22.1.4 show access-lists interface
    • 7.22.2 Configuration Commands
      • 7.22.2.1 mac access-list extended
      • 7.22.2.2 mac access-list extended rename
      • 7.22.2.3 mac access-group in
      • 7.22.2.4 mac access-list
      • 7.22.2.5 access-list
      • 7.22.2.6 no access-list
      • 7.22.2.7 ip access-group
      • 7.22.2.8 ip access-list
      • 7.22.2.9 ip access-list rename
  • 7.23 IPv6 ACL Command
    • 7.23.1 Show Commands
      • 7.23.1.1 show ipv6 access-lists
    • 7.23.2 Configuration Commands
      • 7.23.2.1 ipv6 access-list
      • 7.23.2.2 ipv6 access-list rename
      • 7.23.2.3 {deny | permit} (IPv6)
      • 7.23.2.4 ipv6 traffic-filter
  • 7.24 CoS (Class of Service) Command
    • 7.24.1 Show Commands
      • 7.24.1.1 show queue cos-map
      • 7.24.1.2 show queue ip-dscp-mapping
      • 7.24.1.3 show queue trust
      • 7.24.1.4 show queue cos-queue
    • 7.24.2 Configuration Commands
      • 7.24.2.1 queue cos-map
      • 7.24.2.2 queue trust
      • 7.24.2.3 queue cos-queue min-bandwidth
      • 7.24.2.4 queue cos-queue strict
      • 7.24.2.5 queue cos-queue traffic-shape
  • 7.25 Domain Name Server Relay Commands
    • 7.25.1 Show Commands
      • 7.25.1.1 show hosts
      • 7.25.1.2 show dns
      • 7.25.1.3 show dns cache
    • 7.25.2 Configuration Commands
      • 7.25.2.1 ip hosts
      • 7.25.2.2 clear hosts
      • 7.25.2.3 ip domain-name
      • 7.25.2.4 ip domain-list
      • 7.25.2.5 ip name-server
      • 7.25.2.6 ip domain-lookup
      • 7.25.2.7 clear domain-list
      • 7.25.2.8 clear dns
      • 7.25.2.9 clear dns cache
      • 7.25.2.10 clear dns counter
• 8. Routing Commands
  • le
  • 8.1 Address Resolution Protocol (ARP) Commands
    • 8.1.1 Show Commands
      • 8.1.1.1 show ip arp
      • 8.1.1.2 show ip arp brief
      • 8.1.1.3 show ip arp static
    • 8.1.2 Configuration Commands
      • 8.1.2.1 arp
      • 8.1.2.2 ip proxy-arp
      • 8.1.2.3 ip local-proxy-arp
      • 8.1.2.4 arp cachesize
      • 8.1.2.5 arp dynamicrenew
      • 8.1.2.6 arp purge
      • 8.1.2.7 arp resptime
      • 8.1.2.8 arp retries
      • 8.1.2.9 arp timeout
      • 8.1.2.10 clear ip arp-cache
  • 8.2 IP Routing Commands
    • 8.2.1 Show Commands
      • 8.2.1.1 show ip brief
      • 8.2.1.2 show ip interface port
      • 8.2.1.3 show ip interface brief
      • 8.2.1.4 show ip route
      • 8.2.1.5 show ip route bestroutes
      • 8.2.1.6 show ip route entry
      • 8.2.1.7 show ip route connected
      • 8.2.1.8 show ip route ospf
      • 8.2.1.9 show ip route rip
      • 8.2.1.10 show ip route static
      • 8.2.1.11 show ip route summary
      • 8.2.1.12 show ip route precedence
    • 8.2.2 Configuration Commands
      • 8.2.2.1 routing
      • 8.2.2.2 ip routing
      • 8.2.2.3 ip address
      • 8.2.2.4 ip route
      • 8.2.2.5 ip route default
      • 8.2.2.6 ip route precedence
      • 8.2.2.7 ip mtu
      • 8.2.2.8 encapsulation
  • 8.3 Open Shortest Path First (OSPF) Commands
    • 8.3.1 Show Commands
      • 8.3.1.1 show ip ospf
      • 8.3.1.2 show ip ospf abr
      • 8.3.1.3 show ip ospf area
      • 8.3.1.4 show ip ospf asbr
      • 8.3.1.5 show ip ospf database
      • 8.3.1.6 show ip ospf database database-summary
      • 8.3.1.7 show ip ospf interface
      • 8.3.1.8 show ip ospf interface brief
      • 8.3.1.9 show ip ospf interface stats
      • 8.3.1.10 show ip ospf neighbor
      • 8.3.1.11 show ip ospf range
      • 8.3.1.12 show ip ospf statistics
      • 8.3.1.13 show ip ospf stub table
      • 8.3.1.14 show ip ospf virtual-link
      • 8.3.1.15 show ip ospf virtual-link brief
    • 8.3.2 Configuration Commands
      • 8.3.2.1 router ospf
      • 8.3.2.2 enable
      • 8.3.2.3 network area
      • 8.3.2.4 ip ospf area
      • 8.3.2.5 1583compatibility
      • 8.3.2.6 area default-cost
      • 8.3.2.7 area nssa
      • 8.3.2.8 area nssa default-info-originate
      • 8.3.2.9 area nssa no-redistribute
      • 8.3.2.10 area nssa no-summary
      • 8.3.2.11 area nssa translator-role
      • 8.3.2.12 area nssa translator-stab-intv
      • 8.3.2.13 area range
      • 8.3.2.14 area stub
      • 8.3.2.15 area stub no-summary
      • 8.3.2.16 area virtual-link
      • 8.3.2.17 area virtual-link authentication
      • 8.3.2.18 area virtual-link dead-interval
      • 8.3.2.19 area virtual-link hello-interval
      • 8.3.2.20 area virtual-link retransmit-interval
      • 8.3.2.21 area virtual-link transmit-delay
      • 8.3.2.22 auto-cost
      • 8.3.2.23 bandwidth
      • 8.3.2.24 capability opaque
      • 8.3.2.25 clear ip ospf
      • 8.3.2.26 clear ip ospf configuration
      • 8.3.2.27 clear ip ospf counters
      • 8.3.2.28 clear ip ospf neighbor
      • 8.3.2.29 clear ip ospf neighbor interface
      • 8.3.2.30 clear ip ospf redistribution
      • 8.3.2.31 default-information originate
      • 8.3.2.32 default-metric
      • 8.3.2.33 distance ospf
      • 8.3.2.34 distribute-list out
      • 8.3.2.35 exit-overflow-interval
      • 8.3.2.36 external-lsdb-limit
      • 8.3.2.37 ip ospf authentication
      • 8.3.2.38 ip ospf cost
      • 8.3.2.39 ip ospf dead-interval
      • 8.3.2.40 ip ospf hello-interval
      • 8.3.2.41 ip ospf network
      • 8.3.2.42 ip ospf priority
      • 8.3.2.43 ip ospf retransmit-interval
      • 8.3.2.44 ip ospf transmit-delay
      • 8.3.2.45 ip ospf mtu-ignore
      • 8.3.2.46 router-id
      • 8.3.2.47 redistribute
      • 8.3.2.48 maximum-paths
      • 8.3.2.49 passive-interface default
      • 8.3.2.50 passive-interface
      • 8.3.2.51 timers spf
  • 8.4 BOOTP/DHCP Relay Commands
    • 8.4.1 Show Commands
      • 8.4.1.1 show bootpdhcprelay
    • 8.4.2 Configuration Commands
      • 8.4.2.1 bootpdhcprelay cidoptmode
      • 8.4.2.2 bootpdhcprelay enable
      • 8.4.2.3 bootpdhcprelay maxhopcount
      • 8.4.2.4 bootpdhcprelay minwaittime
      • 8.4.2.5 bootpdhcprelay serverip
  • 8.5 Routing Information Protocol (RIP) Commands
    • 8.5.1 Show Commands
      • 8.5.1.1 show ip rip
      • 8.5.1.2 show ip rip interface
      • 8.5.1.3 show ip rip interface brief
    • 8.5.2 Configuration Commands
      • 8.5.2.1 enable rip
      • 8.5.2.2 ip rip
      • 8.5.2.3 auto-summary
      • 8.5.2.4 default-information originate
      • 8.5.2.5 default-metric
      • 8.5.2.6 distance rip
      • 8.5.2.7 hostrouteaccept
      • 8.5.2.8 split-horizon
      • 8.5.2.9 distribute-list
      • 8.5.2.10 redistribute
      • 8.5.2.11 ip rip authentication
      • 8.5.2.12 ip rip receive version
      • 8.5.2.13 ip rip send version
  • 8.6 Router Discovery Protocol Commands
    • 8.6.1 Show Commands
      • 8.6.1.1 show ip irdp
    • 8.6.2 Configuration Commands
      • 8.6.2.1 ip irdp
      • 8.6.2.2 ip irdp broadcast
      • 8.6.2.3 ip irdp holdtime
      • 8.6.2.4 ip irdp maxadvertinterval
      • 8.6.2.5 ip irdp minadvertinterval
      • 8.6.2.6 ip irdp preference
  • 8.7 VLAN Routing Commands
    • 8.7.1 show ip vlan
    • 8.7.2 vlan routing
  • 8.8 Virtual Router Redundancy Protocol (VRRP) Commands
    • 8.8.1 Show Commands
      • 8.8.1.1 show ip vrrp
      • 8.8.1.2 show ip vrrp brief
      • 8.8.1.3 show ip vrrp interface
      • 8.8.1.4 show ip vrrp interface stats
    • 8.8.2 Configuration Commands
      • 8.8.2.1 ip vrrp
      • 8.8.2.2 ip vrrp ip
      • 8.8.2.3 ip vrrp mode
      • 8.8.2.4 ip vrrp authentication
      • 8.8.2.5 ip vrrp preempt
      • 8.8.2.6 ip vrrp priority
      • 8.8.2.7 ip vrrp timers advertise
      • 8.8.2.8 ip vrrp track interface
      • 8.8.2.9 ip vrrp track ip route
• 9. IP Multicast Commands
  • 9.1 Distance Vector Multicast Routing Protocol (DVMRP) Commands
    • 9.1.1 Show Commands
      • 9.1.1.1 show ip dvmrp
      • 9.1.1.2 show ip dvmrp interface
      • 9.1.1.3 show ip dvmrp neighbor
      • 9.1.1.4 show ip dvmrp nexthop
      • 9.1.1.5 show ip dvmrp prune
      • 9.1.1.6 show ip dvmrp route
    • 9.1.2 Configuration Commands
      • 9.1.2.1 ip dvmrp
      • 9.1.2.2 ip dvmrp metric
  • 9.2 Internet Group Management Protocol (IGMP) Commands
    • 9.2.1 Show Commands
      • 9.2.1.1 show ip igmp
      • 9.2.1.2 show ip igmp groups
      • 9.2.1.3 show ip igmp interface
      • 9.2.1.4 show ip igmp interface membership
      • 9.2.1.5 show ip igmp interface stats
    • 9.2.2 Configuration Commands
      • 9.2.2.1 ip igmp
      • 9.2.2.2 ip igmp version
      • 9.2.2.3 ip igmp last-member-query-count
      • 9.2.2.4 ip igmp last-member-query-interval
      • 9.2.2.5 ip igmp query-interval
      • 9.2.2.6 ip igmp query-max-response-time
      • 9.2.2.7 ip igmp robustness
      • 9.2.2.8 ip igmp startup-query-count
      • 9.2.2.9 ip igmp startup-query-interval
  • 9.3 MLD Commands
    • 9.3.1 Show Commands
      • 9.3.1.1 show ipv6 mld groups
      • 9.3.1.2 show ipv6 mld interface [<slot/port>]
      • 9.3.1.3 show ipv6 mld traffic
    • 9.3.2 Configuration Commands
      • 9.3.2.1 ipv6 mld query-interval
      • 9.3.2.2 ipv6 mld query-max-response-time
      • 9.3.2.3 ipv6 mld last-member-query-interval
      • 9.3.2.4 ipv6 mld last-member-query- count
      • 9.3.2.5 ipv6 mld router
      • 9.3.2.6 clear ipv6 mld counters
      • 9.3.2.7 clear ipv6 mld traffic
      • 9.3.2.8 ipv6 mld version
  • 9.4 Multicast Commands
    • 9.4.1 Show Commands
      • 9.4.1.1 show ip mcast
      • 9.4.1.2 show ip mcast boundary
      • 9.4.1.3 show ip mcast interface
      • 9.4.1.4 show ip mcast mroute
    • 9.4.2 Configuration Commands
      • 9.4.2.1 ip multicast
      • 9.4.2.2 ip mcast boundary
      • 9.4.2.3 ip multicast ttl-threshold
  • 9.5 Protocol Independent Multicast – Dense Mode (PIM-DM) Commands
    • 9.5.1 Show Commands
      • 9.5.1.1 show ip pimdm
      • 9.5.1.2 show ip pimdm interface
      • 9.5.1.3 show ip pimdm interface stats
      • 9.5.1.4 show ip pimdm neighbor
    • 9.5.2 Configuration Commands
      • 9.5.2.1 ip pimdm
      • 9.5.2.2 ip pimdm
      • 9.5.2.3 ip pimdm hello-interval
  • 9.6 Protocol Independent Multicast – Sparse Mode (PIM-SM) Commands
    • 9.6.1 Show Commands
      • 9.6.1.1 show ip pimsm
      • 9.6.1.2 show ip pimsm bsr
      • 9.6.1.3 show ip pimsm interface
      • 9.6.1.4 show ip pimsm neighbor
      • 9.6.1.5 show ip pimsm rphash
      • 9.6.1.6 show ip pimsm rp mapping
    • 9.6.2 Configuration Commands
      • 9.6.2.1 ip pimsm
      • 9.6.2.2 ip pimsm join-prune-interval
      • 9.6.2.3 ip pimsm register-threshold
      • 9.6.2.4 ip pimsm spt-threshold
      • 9.6.2.5 ip pimsm rp-address
      • 9.6.2.6 ip pimsm
      • 9.6.2.7 ip pimsm hello-interval
      • 9.6.2.8 ip pimsm bsr-border
      • 9.6.2.9 ip pimsm dr-priority
      • 9.6.2.10 ip pimsm bsr-candidate
      • 9.6.2.11 ip pimsm rp-candidate
      • 9.6.2.12 ip pimsm ssm default
  • 9.7 IGMP Proxy Commands
    • 9.7.1 Show Commands
      • 9.7.1.1 show ip igmp-proxy
      • 9.7.1.2 show ip igmp-proxy groups
      • 9.7.1.3 show ip igmp-proxy groups detail
      • 9.7.1.4 show ip igmp-proxy interface
    • 9.7.2 Configuration Commands
      • 9.7.2.1 ip igmp-proxy
      • 9.7.2.2 ip igmp-proxy reset-status
      • 9.7.2.3 ip igmp-proxy unsolicit-rprt-interval
  • 9.8 MLD Proxy Commands
    • 9.8.1 Show Commands
      • 9.8.1.1 show ipv6 mld-proxy
      • 9.8.1.2 show ipv mld-proxy groups
      • 9.8.1.3 show ipv6 mld-proxy groups detail
      • 9.8.1.4 show ipv6 mld-proxy interface
    • 9.8.2 Configuration Commands
      • 9.8.2.1 ipv6 mld-proxy
      • 9.8.2.2 ipv6 mld-proxy reset-status
      • 9.8.2.3 ipv6 mld-proxy unsolicit-rprt-interval
• 10. IPv6 Commands
  • 10.1 Tunnel Interface Commands
    • 10.1.1 Show Commands
      • 10.1.1.1 show interface tunnel
    • 10.1.2 Configuration Commands
      • 10.1.2.1 interface tunnel
      • 10.1.2.2 tunnel source
      • 10.1.2.3 tunnel destination
      • 10.1.2.4 tunnel mode ipv6ip
  • 10.2 Loopback Interface Commands
    • 10.2.1 Show Commands
      • 10.2.1.1 show interface loopback
    • 10.2.2 Configuration Commands
      • 10.2.2.1 interface loopback
  • 10.3 IPv6 Routing Commands
    • 10.3.1 Show Commands
      • 10.3.1.1 show ipv6 brief
      • 10.3.1.2 show ipv6 interface port
      • 10.3.1.3 show ipv6 interface neighbors
      • 10.3.1.4 show ipv6 interface neighbors static
      • 10.3.1.5 show ipv6 ndp
      • 10.3.1.6 show ipv6 route
      • 10.3.1.7 show ipv6 route preferences
      • 10.3.1.8 show ipv6 route summary
      • 10.3.1.9 show ipv6 vlan
      • 10.3.1.10 show ipv6 traffic
    • 10.3.2 Configuration Commands
      • 10.3.2.1 ipv6 forwarding
      • 10.3.2.2 ipv6 hop-limit
      • 10.3.2.3 ipv6 unicast-routing
      • 10.3.2.4 ipv6 enable
      • 10.3.2.5 ipv6 address
      • 10.3.2.6 ipv6 gateway
      • 10.3.2.7 ipv6 route
      • 10.3.2.8 ipv6 route distance
      • 10.3.2.9 ipv6 mtu
      • 10.3.2.10 ipv6 nd dad attempts
      • 10.3.2.11 ipv6 nd managed-config-flag
      • 10.3.2.12 ipv6 nd ns-interval
      • 10.3.2.13 ipv6 nd other-config-flag
      • 10.3.2.14 ipv6 nd ra-interval
      • 10.3.2.15 ipv6 nd ra-lifetime
      • 10.3.2.16 ipv6 nd reachable-time
      • 10.3.2.17 ipv6 nd suppress-ra
      • 10.3.2.18 ipv6 nd prefix
      • 10.3.2.19 ipv6 unreachables
      • 10.3.2.20 ipv6 icmp error-interval
      • 10.3.2.21 ipv6 neighbors static
  • 10.4 OSPFv3 Commands
    • 10.4.1 Show Commands
      • 10.4.1.1 show ipv6 ospf
      • 10.4.1.2 show ip ospf abr
      • 10.4.1.3 show ipv6 ospf area
      • 10.4.1.4 show ipv6 ospf asbr
      • 10.4.1.5 show ipv6 ospf database
      • 10.4.1.6 show ipv6 ospf database database-summary
      • 10.4.1.7 show ipv6 ospf interface
      • 10.4.1.8 show ipv6 ospf interface brief
      • 10.4.1.9 show ipv6 ospf interface stats
      • 10.4.1.10 show ipv6 ospf neighbor
      • 10.4.1.11 show ipv6 ospf range
      • 10.4.1.12 show ipv6 ospf stub table
      • 10.4.1.13 show ipv6 ospf virtual-link
      • 10.4.1.14 show ipv6 ospf virtual-link brief
    • 10.4.2 Configuration Commands
      • 10.4.2.1 ipv6 ospf
      • 10.4.2.2 ipv6 ospf areaid
      • 10.4.2.3 ipv6 ospf cost
      • 10.4.2.4 ipv6 ospf dead-interval
      • 10.4.2.5 ipv6 ospf hello-interval
      • 10.4.2.6 ipv6 ospf mtu-ignore
      • 10.4.2.7 ipv6 ospf network
      • 10.4.2.8 ipv6 ospf priority
      • 10.4.2.9 ipv6 ospf retransmit-interval
      • 10.4.2.10 ipv6 ospf transmit-delay
      • 10.4.2.11 ipv6 router ospf
      • 10.4.2.12 area default-cost
      • 10.4.2.13 area nssa
      • 10.4.2.14 area nssa default-info-originate
      • 10.4.2.15 area nssa no-redistribute
      • 10.4.2.16 area nssa no-summary
      • 10.4.2.17 area nssa translator-role
      • 10.4.2.18 area nssa translator-stab-intv
      • 10.4.2.19 area range
      • 10.4.2.20 area stub
      • 10.4.2.21 area stub no-summary
      • 10.4.2.22 area virtual-link
      • 10.4.2.23 area virtual-link dead-interval
      • 10.4.2.24 area virtual-link hello-interval
      • 10.4.2.25 area virtual-link retransmit-interval
      • 10.4.2.26 area virtual-link transmit-delay
      • 10.4.2.27 auto-cost
      • 10.4.2.28 default-information originate
      • 10.4.2.29 default-metric
      • 10.4.2.30 distance ospf
      • 10.4.2.31 enable
      • 10.4.2.32 exit-overflow-interval
      • 10.4.2.33 external-lsdb-limit
      • 10.4.2.34 maximum-paths
      • 10.4.2.35 passive-interface default
      • 10.4.2.36 passive-interface
      • 10.4.2.37 redistribute
      • 10.4.2.38 router-id
  • 10.5 RIPng Commands
    • 10.5.1 Show Commands
      • 10.5.1.1 show ipv6 rip
    • 10.5.2 Configuration Commands
      • 10.5.2.1 enable
      • 10.5.2.2 ipv6 rip
      • 10.5.2.3 ipv6 router rip
      • 10.5.2.4 default-information originate
      • 10.5.2.5 default-metric
      • 10.5.2.6 distance rip
      • 10.5.2.7 split-horizon
      • 10.5.2.8 redistribute
      • 10.5.2.9 ipv6 rip timer
      • 10.5.2.10 ipv6 rip passive-interface
  • 10.6 Protocol Independent Multicast – Dense Mode (PIM-DM) Commands
    • 10.6.1 Show Commands
      • 10.6.1.1 show ipv6 pimdm
      • 10.6.1.2 show ipv6 pimdm interface
      • 10.6.1.3 show ipv6 pimdm neighbor
    • 10.6.2 Configuration Commands
      • 10.6.2.1 ipv6 pimdm
      • 10.6.2.2 ipv6 pimdm hello-interval
  • 10.7 Protocol Independent Multicast – Sparse Mode (PIM-SM) Commands
    • 10.7.1 Show Commands
      • 10.7.1.1 show ipv6 pimsm
      • 10.7.1.2 show ipv6 pimsm bsr
      • 10.7.1.3 show ipv6 pimsm interface
      • 10.7.1.4 show ipv6 pimsm neighbor
      • 10.7.1.5 show ipv6 pimsm rphash
      • 10.7.1.6 show ipv6 pimsm rp mapping
    • 10.7.2 Configuration Commands
      • 10.7.2.1 ipv6 pimsm
      • 10.7.2.2 ipv6 pimsm bsr-candidate
      • 10.7.2.3 ipv6 pimsm register-threshold
      • 10.7.2.4 ipv6 pimsm rp-address
      • 10.7.2.5 ipv6 pimsm rp-candidate
      • 10.7.2.6 ipv6 pimsm spt-threshold
      • 10.7.2.7 ipv6 pimsm ssm
      • 10.7.2.8 ipv6 pimsm bsr-border
      • 10.7.2.9 ipv6 pimsm dr-priority
      • 10.7.2.10 ipv6 pimsm join-prune-interval
      • 10.7.2.11 ipv6 pimsm hello-interval
• 11. Web-Based Management Interface
  • 11.1 Overview
  • 11.2 System Menu
    • 11.2.1 View ARP Cache
    • 11.2.2 Viewing Inventory Information
    • 11.2.3 Configuring Management Session and Network Parameters
      • 11.2.3.1 Viewing System Description Page
      • 11.2.3.2 Configuring Service Port Page
      • 11.2.3.3 Configuring ServicePort NDP Summary
      • 11.2.3.4 Configuring Network Connectivity Page
      • 11.2.3.5 Configuring Network Connection NDP Summary Page
      • 11.2.3.6 HTTP Configuration
      • 11.2.3.7 Configuring Telnet Session Page
      • 11.2.3.8 Configuring Outbound Telnet Client Configuration Page
      • 11.2.3.9 Configuring Outbound SSH Client Configuration Page
      • 11.2.3.10 Configuring Serial Port Page
      • 11.2.3.11 Defining User Accounts Page
      • 11.2.3.12 Defining Authentication List Configuration Page
      • 11.2.3.13 Viewing Login Session Page
      • 11.2.3.14 Viewing Authentication List Summary Page
      • 11.2.3.15 Defining User Login Page
      • 11.2.3.16 Defining Password Management
      • 11.2.3.17 Defining Denial Of Service Page
    • 11.2.4 Defining Forwarding Database
      • 11.2.4.1 Configuring MAC Table aging interval time Page
      • 11.2.4.2 Viewing Forwarding Database Page
    • 11.2.5 Viewing Logs
      • 11.2.5.1 Viewing Buffered Log Configuration Page
      • 11.2.5.2 Viewing Buffered Log Page
      • 11.2.5.3 Configuring Command Logger Page
      • 11.2.5.4 Configuring Console Log Page
      • 11.2.5.5 Viewing Event Log Page
      • 11.2.5.6 Configuring Hosts configuration Page
      • 11.2.5.7 Configuring Terminal Log Configuration Page
      • 11.2.5.8 Configuring syslog configuration Page
    • 11.2.6 Managing Switch Interface
      • 11.2.6.1 Configuring Switch Interface Page
      • 11.2.6.2 Viewing Switch Interface Configuration Page
      • 11.2.6.3 Configuring Port Description Function Page
      • 11.2.6.4 Configuring Cable Test Function Page
      • 11.2.6.5 Configuring Multiple Port Mirroring Function Page
      • 11.2.6.6 Configuring Double VLAN Tunneling Function Page
      • 11.2.6.7 Configuring Double VLAN Tnuueling Summary Function Page
    • 11.2.7 Defining sFlow
      • 11.2.7.1 Configuring sFlow Agent Summary Configuration Page
      • 11.2.7.2 Configuring sFlow Receiver Configuration Page
      • 11.2.7.3 Configuring sFlow Poller Configuration Page
      • 11.2.7.4 Configuring sFlow Sampler Configuration Page
      • 11.2.7.5 Viewing sFlow Port Summary Page
    • 11.2.8 Defining SNMP
      • 11.2.8.1 Configuring SNMP Community Configuration Page
      • 11.2.8.2 Configuring SNMP Trap Receiver Configuration Page
      • 11.2.8.3 Viewing SNMP supported MIBs Page
    • 11.2.9 Viewing Statistics
      • 11.2.9.1 Viewing the whole Switch Detailed Statistics Page
      • 11.2.9.2 Viewing the whole Switch Summary Statistics Page
      • 11.2.9.3 Viewing Each Port Detailed Statistics Page
      • 11.2.9.4 Viewing Each Port Summary Statistics Page
    • 11.2.10 Managing System Utilities
      • 11.2.10.1 Saving All Configuration Changed Page
      • 11.2.10.2 Resetting the Switch Page
      • 11.2.10.3 Restoring All Configuration to Default Values Page
      • 11.2.10.4 Resetting the Passwords to Default Values Page
      • 11.2.10.5 Downloading Specific Files to Switch Flash Page
      • 11.2.10.6 Uploading Specific Files from Switch Flash Page
      • 11.2.10.7 Defining Configuration and Runtime Startup File Page
      • 11.2.10.8 Removing Specific File Page
      • 11.2.10.9 Copying Running Configuration to Flash Page
      • 11.2.10.10 Defining Ping Function Page
      • 11.2.10.11 Defining Ping IPv6 Function Page
      • 11.2.10.12 TraceRoute Function
    • 11.2.11 Managing CDP Function
      • 11.2.11.1 Defining CDP Configuration Page
      • 11.2.11.2 Viewing Neighbors Information Page
      • 11.2.11.3 Viewing Traffic Statistics Page
    • 11.2.12 Defining Trap Manager
      • 11.2.12.1 Configuring Trap Flags Page
      • 11.2.12.2 Viewing Trap Log Page
    • 11.2.13 Configuring SNTP
      • 11.2.13.1 Configuring SNTP Global Configuration Page
      • 11.2.13.2 Viewing SNTP Global Status Page
      • 11.2.13.3 Configuring SNTP Server Page
      • 11.2.13.4 Viewing SNTP Server Status Page
      • 11.2.13.5 Configuring Current Time Settings Page
      • 11.2.13.6 Configuring Time Zone Settings Page
    • 11.2.14 Defining DHCP Client
      • 11.2.14.1 Configuring DHCP Restart Page
        • 11.2.14.1.1 Configurating DHCPv6 Restart Page
      • 11.2.14.2 Configuring DHCP Client-identifier Page
    • 11.2.15 Defining DNS Relay Function
      • 11.2.15.1 Configuring DNS Relay Configuration Page
      • 11.2.15.2 Configuring Domain Name Configuration Page
      • 11.2.15.3 Configuring Name Server Configuration Page
      • 11.2.15.4 Configuring DNS Cache Summary Page
      • 11.2.15.5 Configuring Hosts Configuration Page
  • 11.3 Switching Menu
    • 11.3.1 Managing DHCP Snooping
      • 11.3.1.1 Configuring DHCP Snooping Configuration Page
      • 11.3.1.2 Configuring DHCP Snooping VLAN Configuration Page
      • 11.3.1.3 Configuring DHCP Snooping Interface Configuration Page
      • 11.3.1.4 Configuring DHCP Snooping Static Binding Configuration Page
      • 11.3.1.5 Configuring DHCP Snooping Persistent Configuration Page
      • 11.3.1.6 DHCP Snooping Interface Statistics Page
    • 11.3.2 Managing IP Source Guard (IPSG)
      • 11.3.2.1 Configuring IPSG Configuration Page
      • 11.3.2.2 Configuring IPSG Static Binding Configuration Page
    • 11.3.3 Managing Dynamic ARP Inspection (DAI)
      • 11.3.3.1 Configuring DAI Global Configuration Page
      • 11.3.3.2 Configuring DAI VLAN Configuration Page
      • 11.3.3.3 Configuring DAI Interface Configuration Page
      • 11.3.3.4 Configuring DAI ARP ACL Configuration Page
      • 11.3.3.5 Configuring DAI ARP ACL Rule Configuration Page
      • 11.3.3.6 Configuring DAI Statistics Page
    • 11.3.4 Managing Filters
      • 11.3.4.1 Configuring MAC filter Configuration Page
      • 11.3.4.2 MAC filter Summary Page
    • 11.3.5 Managing Port-based VLAN
      • 11.3.5.1 Configuring Port-based VLAN Configuration Page
      • 11.3.5.2 Viewing Port-based VLAN Information Page
      • 11.3.5.3 Configuring VLAN Port Configuration Page
      • 11.3.5.4 Viewing VLAN Port Summary Page
      • 11.3.5.5 Resetting VLAN Configuration Page
    • 11.3.6 Managing Protected Ports
      • 11.3.6.1 Protected Ports Configuration Page
      • 11.3.6.2 Protected Ports Summary Page
    • 11.3.7 Managing Protocol-based VLAN
      • 11.3.7.1 Protocol-based VLAN Configuration Page
      • 11.3.7.2 Viewing Protocol-based VLAN Information Page
    • 11.3.8 Managing IP Subnet-based VLAN
      • 11.3.8.1 IP Subnet-based VLAN Configuration Page
      • 11.3.8.2 Viewing IP Subnet-based VLAN Information Page
    • 11.3.9 Managing MAC-based VLAN
      • 11.3.9.1 MAC-based VLAN Configuration Page
      • 11.3.9.2 Viewing MAC-based VLAN Information Page
    • 11.3.10 Managing MAC-based Voice VLAN
      • 11.3.10.1 Voice VLAN Administration Page
      • 11.3.10.2 Voice VLAN Configuration Page
      • 11.3.10.3 Viewing Voice VLAN Information Page
    • 11.3.11 Managing Voice VLAN
      • 11.3.11.1 Voice VLAN Configuration Page
    • 11.3.12 Defining GARP
      • 11.3.12.1 Viewing GARP Information Page
      • 11.3.12.2 Configuring the whole Switch GARP Configuration Page
      • 11.3.12.3 Configuring each Port GARP Configuration Page
    • 11.3.13 Managing IGMP Snooping
      • 11.3.13.1 Configuring IGMP Snooping Global Configuration Page
      • 11.3.13.2 Defining IGMP Snooping Interface Configuration Page
      • 11.3.13.3 Configuring IGMP Snooping VLAN Page
      • 11.3.13.4 Viewing IGMP Snooping VLAN Status Page
      • 11.3.13.5 Configuring Multicast Router Page
      • 11.3.13.6 Viewing Multicast Router Statistics Page
      • 11.3.13.7 Configuring Multicast Router VLAN Page
      • 11.3.13.8 Viewing Multicast Router VLAN Statistics Page
      • 11.3.13.9 Configuring L2 Static Multicast Group Configuration Page
      • 11.3.13.10 Viewing L2 Multicast Group Status Page
    • 11.3.14 Managing IGMP Snooping Querier
      • 11.3.14.1 Configuring IGMP Snooping Querier Configuration Page
      • 11.3.14.2 Configuring IGMP Snooping Querier VLAN Configuration Page
      • 11.3.14.3 IGMP Snooping Querier VLAN Configuration Summary Page
      • 11.3.14.4 IGMP Snooping Querier VLAN Status Page
    • 11.3.15 Managing MLD Snooping
      • 11.3.15.1 Configuring MLD Snooping Global Configuration and Status Page
      • 11.3.15.2 Configuring MLD Snooping Interface Configuration Page
      • 11.3.15.3 Configuring MLD Snooping VLAN Configuration Page
      • 11.3.15.4 Configuring MLD Snooping VLAN Status Page
      • 11.3.15.5 Configuring Multicast Router Status Page
      • 11.3.15.6 Configuring Multicast Router Status Page
      • 11.3.15.7 Configuring Multicast VLAN Configuration Page
      • 11.3.15.8 Configuring Multicast Router VLAN Status Page
      • 11.3.15.9 Configuring L2 Static Multicast Group Configuration Page
      • 11.3.15.10 Viewing L2 Multicast Group Status Page
    • 11.3.16 Managing MLD Snooping Querier
      • 11.3.16.1 Configuring MLD Snooping Querier Configuration Page
      • 11.3.16.2 Configuring MLD Snooping VLAN Configuration Page
      • 11.3.16.3 Configuring MLD Snooping VLAN Configuration Summary Page
      • 11.3.16.4 Configuring MLD Snooping Querier VLAN Status Page
    • 11.3.17 Managing Port-Channel
      • 11.3.17.1 Configuring Port-Channel Configuration Page
      • 11.3.17.2 Viewing Port-Channel Information Page
    • 11.3.18 Viewing Multicast Forwarding Database
      • 11.3.18.1 Viewing All of Multicast Forwarding Database Tables Page
      • 11.3.18.2 Viewing GMRP MFDB Table Page
      • 11.3.18.3 Viewing IGMP Snooping MFDB Table Page
      • 11.3.18.4 Viewing MLD Snooping MFDB Table Page
      • 11.3.18.5 Viewing Multicast Forwarding Database Statistics Page
    • 11.3.19 Managing Spanning Tree
      • 11.3.19.1 Configuring Switch Spanning Tree Configuration Page
      • 11.3.19.2 Configuring Spanning Tree CST Configuration Page
      • 11.3.19.3 Configuring Spanning Tree MST Configuration Page
      • 11.3.19.4 Configuring each Port CST Configuration Page
      • 11.3.19.5 Configuring each Port MST Configuration Page
      • 11.3.19.6 Viewing Spanning Tree Statistics Page
    • 11.3.20 Defining 802.1p priority
      • 11.3.20.1 Defining 802.1p Priority Mapping Page
    • 11.3.21 Managing Port Security
      • 11.3.21.1 Configuring Port Security Administration Mode Page
      • 11.3.21.2 Configuring Port Security Interface Page
      • 11.3.21.3 Deleting Port Security Statically Configured MAC Address Page
      • 11.3.21.4 Viewing Port Security Dynamically Learnt MAC Address Page
      • 11.3.21.5 Viewing Port Security Violation Status Page
      • 11.3.21.6 Clearing Port Security Dynamically Learned MAC Addresses Page
    • 11.3.22 Managing LLDP
      • 11.3.22.1 Configuring LLDP Global Configuration Page
      • 11.3.22.2 Configuring LLDP Interface Configuration Page
      • 11.3.22.3 Viewing LLDP Interface Summary Page
      • 11.3.22.4 Viewing LLDP Statistics Page
      • 11.3.22.5 Viewing LLDP Local Device Information Page
      • 11.3.22.6 Viewing LLDP Local Device Summary Page
      • 11.3.22.7 Viewing LLDP Remote Device Information Page
      • 11.3.22.8 Viewing LLDP Remote Device Summary Page
    • 11.3.23 Managing LLDP-MED
      • 11.3.23.1 Configuring LLDP-MED Global Configuration Page
      • 11.3.23.2 Configuring LLDP-MED Interface Configuration Page
      • 11.3.23.3 Configuring LLDP-MED Interface Summary Page
      • 11.3.23.4 Configuring LLDP-MED Local Device Information Page
      • 11.3.23.5 Configuring LLDP-MED Remote Device Information Page
    • 11.3.24 Managing VTP
      • 11.3.24.1 Configuring VTP Configuration Page
      • 11.3.24.2 Viewing VTP Status Page
    • 11.3.25 Managing Link State
      • 11.3.25.1 Configuring Link State Configuration Page
      • 11.3.25.2 Configuring Link State Status
    • 11.3.26 Managing Port-Backup
      • 11.3.26.1 Configuring Port-Backup Configuration
      • 11.3.26.2 Configuring Port-Backup Status
    • 11.3.27 Managing FIP-Snooping
      • 11.3.27.1 Configuring FIP-Snooping Configuration
      • 11.3.27.2 Viewing FIP-Snooping Status
  • 11.4 Routing Menu
    • 11.4.1 Managing ARP Table
      • 11.4.1.1 Creating ARP entries
      • 11.4.1.2 Configuring ARP Table
    • 11.4.2 Managing IP Interfaces
      • 11.4.2.1 Configuring IP
      • 11.4.2.2 Viewing IP Statistics
      • 11.4.2.3 Configuring IP Interfaces
    • 11.4.3 Managing OSPF
      • 11.4.3.1 Configuring OSPF
      • 11.4.3.2 Configuring Area
      • 11.4.3.3 Viewing Stub Area Summary Information
      • 11.4.3.4 Configuring Area Range
      • 11.4.3.5 View Interface Statistics
      • 11.4.3.6 Configuring OSPF Interface
      • 11.4.3.7 Viewing Neighbor Table Information
      • 11.4.3.8 Configuring OSPF Neighbor
      • 11.4.3.9 Viewing OSPF Link State Database
      • 11.4.3.10 Configuring OSPF Virtual Link
      • 11.4.3.11 Viewing OSPF Virtual Link Summary Table
      • 11.4.3.12 Configuring OSPF Route Redistribution
      • 11.4.3.13 Viewing OSPF Route Redistribution Summary Information
    • 11.4.4 Managing BOOTP/DHCP Relay Agent
      • 11.4.4.1 Configuring BOOTP/DHCP Relay Agent
      • 11.4.4.2 Viewing BOOTP/DHCP Relay Agent Status
    • 11.4.5 Managing Routing Information Protocol (RIP)
      • 11.4.5.1 Configuring RIP Global Configuration Page
      • 11.4.5.2 Viewing Each Routing Interface’s RIP Configuration Page
      • 11.4.5.3 Defining The Routing Interface’s RIP Configuration Page
      • 11.4.5.4 Configuring Route Redistribution Configuration
      • 11.4.5.5 Viewing Route Redistribution Configuration
    • 11.4.6 Managing Router Discovery
      • 11.4.6.1 Configuring Router Discovery
      • 11.4.6.2 Viewing Router Discovery Status
    • 11.4.7 Managing Route Table
      • 11.4.7.1 Viewing Router Route Table
      • 11.4.7.2 Viewing Router Best Route Table
      • 11.4.7.3 Configuring Router Static Route Entry
      • 11.4.7.4 Configuring (Static) Routes Entry
      • 11.4.7.5 Configuring Router Route Preference
    • 11.4.8 Managing VLAN Routing
      • 11.4.8.1 Configuring VLAN Routing
      • 11.4.8.2 Viewing VLAN Routing Summary Information
    • 11.4.9 Managing VRRP
      • 11.4.9.1 Configuring VRRP
      • 11.4.9.2 Configuring Virtual Router
      • 11.4.9.3 Configuring VRRP Secondary Address
      • 11.4.9.4 Configuring VRRP Interface Tracking
      • 11.4.9.5 Configuring VRRP Track Interface
      • 11.4.9.6 Configuring VRRP Route Tracking
      • 11.4.9.7 Configuring VRRP Track Route
      • 11.4.9.8 Viewing Virtual Router Status
      • 11.4.9.9 Viewing Virtual Router Statistics
    • 11.4.10 Managing Tunnels
      • 11.4.10.1 Configuring Tunnels Configuration Page
      • 11.4.10.2 Viewing Tunnels Summary Page
    • 11.4.11 Managing Loopbacks
      • 11.4.11.1 Configuring Loopbacks Configuration Page
      • 11.4.11.2 Viewing Loopbacks Summary Page
  • 11.5 Security Menu
    • 11.5.1 Managing Access Control (802.1x)
      • 11.5.1.1 Defining Access Control Page
      • 11.5.1.2 Configuring each Port Access Control Configuration Page
      • 11.5.1.3 Viewing each Port Access Control Configuration Information Page
      • 11.5.1.4 Viewing Access Control Summary Page
      • 11.5.1.5 Viewing each Port Access Control Statistics Page
      • 11.5.1.6 Defining Port Access Client Summary Page
      • 11.5.1.7 Defining Port Access Client Summary Page
      • 11.5.1.8 Defining Access Control User Login Page
      • 11.5.1.9 Defining each Port Access Privileges Page
      • 11.5.1.10 Viewing each Port Access Privileges Summary Page
    • 11.5.2 Managing RADIUS
      • 11.5.2.1 Configuring RADIUS Configuration Page
      • 11.5.2.2 Configuring RADIUS Server Configuration Page
      • 11.5.2.3 Viewing RADIUS Server Statistics Page
      • 11.5.2.4 Defining RADIUS Accounting Server Configuration Page
      • 11.5.2.5 Viewing RADIUS Accounting Server Statistics Page
      • 11.5.2.6 Resetting All RADIUS Statistics Page
    • 11.5.3 Defining TACACS+ Configuration
      • 11.5.3.1 Configuring TACACS Configuration Page
      • 11.5.3.2 Configuring TACACS+ Server Configuration Page
    • 11.5.4 Defining IP Filter Configuration
      • 11.5.4.1 IP Filter Configuration Page
    • 11.5.5 Defining Secure Http Configuration
      • 11.5.5.1 Secure HTTP Configuration Page
    • 11.5.6 Defining Secure Shell Configuration
      • 11.5.6.1 Configuring Secure Shell Configuration Page
  • 11.6 IPv6 Menu
    • 11.6.1 Configuring IPv6 Global Configuration Page
    • 11.6.2 Configuring IPv6 Interface Configuration Page
    • 11.6.3 Viewing IPv6 Interface Summary Page
    • 11.6.4 Viewing IPv6 Interface Statistics Page
    • 11.6.5 Viewing IPv6 Neighbor Table Information Page
    • 11.6.6 Viewing IPv6 Static Neighbor Table Information Page
    • 11.6.7 Managing OSPFv3 Protocol
      • 11.6.7.1 Configuring OSPFv3 Configuration Page
      • 11.6.7.2 Configuring OSPFv3 Area Configuration Page
      • 11.6.7.3 Viewing OSPFv3 Stub Area Summary Page
      • 11.6.7.4 Configuring OSPFv3 Area Range Configuration Page
      • 11.6.7.5 Configuring OSPFv3 Interface Configuration Page
      • 11.6.7.6 Viewing OSPFv3 Interface Statistics Page
      • 11.6.7.7 Viewing OSPFv3 Neighbor Information Page
      • 11.6.7.8 Viewing OSPFv3 Neighbor Table Information Page
      • 11.6.7.9 Viewing OSPFv3 Link State Database Information Page
      • 11.6.7.10 Configuring OSPFv3 Virtual Link Configuration Page
      • 11.6.7.11 Viewing OSPFv3 Virtual Link Summary Page
      • 11.6.7.12 Configuring OSPFv3 Route Redistribution Configuration Page
      • 11.6.7.13 Viewing OSPFv3 Route Redistribution Summary Page
    • 11.6.8 Managing IPv6 Routes
      • 11.6.8.1 Configuring IPv6 Route Entry Configuration Page
      • 11.6.8.2 Viewing IPv6 Route Table Information Page
      • 11.6.8.3 Configuring IPv6 Router Route Preference Page
      • 11.6.8.4 Configuring IPv6 Routes Configuration Page
    • 11.6.9 Managing RIPv6
      • 11.6.9.1 Configuring RIPv6 Configuration Page
      • 11.6.9.2 Configuring RIPv6 Interface Configuration Page
      • 11.6.9.3 Configuring RIPv6 Redistribution Configuration Page
      • 11.6.9.4 Configuring RIPv6 Route Redistribution Summary Page
  • 11.7 QOS Menu
    • 11.7.1 Managing Access Control Lists
      • 11.7.1.1.1 Configuring IP Access Control List Configuration Page
      • 11.7.1.2 Viewing IP Access Control List Summary Page
      • 11.7.1.3 Configuring IP Access Control List Rule Configuration Page
      • 11.7.1.4 Configuring IPv6 Access Control List Configuration Page
      • 11.7.1.5 IPv6 Access Control List Summary Page
      • 11.7.1.6 IPv6 Access Control List Rule Configuration Page
      • 11.7.1.7 Configuring MAC Access Control List Configuration Page
      • 11.7.1.8 Viewing MAC Access Control List Summary Page
      • 11.7.1.9 Configuring MAC Access Control List Rule Configuration Page
      • 11.7.1.10 Configuring Access Control List Interface Configuration Page
      • 11.7.1.11 Configuring Access Control List VLAN ACL Configuration Page
      • 11.7.1.12 Access Control List VLAN ACL Summary Page
    • 11.7.2 Managing Differentiated Services
      • 11.7.2.1 Defining DiffServ Configuration Page
      • 11.7.2.2 Configuring DiffServ Class Configuration Page
      • 11.7.2.3 Viewing DiffServ Class Summary Page
      • 11.7.2.4 DiffServ Policy Configuration Page
      • 11.7.2.5 Viewing DiffServ Policy Summary Page
      • 11.7.2.6 Configuring DiffServ Policy Class Definition Page
      • 11.7.2.7 Viewing DiffServ Policy Attribute Summary Page
      • 11.7.2.8 Configuring DiffServ Service Configuration Page
      • 11.7.2.9 Viewing DiffServ Service Summary Page
      • 11.7.2.10 Viewing DiffServ Service Statistics Page
      • 11.7.2.11 Viewing DiffServ Service Detailed Statistics Page
    • 11.7.3 Configuring Diffserv Wizard Page
    • 11.7.4 Managing Class of Service
      • 11.7.4.1 Configuring Trust Mode Configuration Page
      • 11.7.4.2 Managing DSCP Mapping Configuration Page
      • 11.7.4.3 Configuring CoS interface
      • 11.7.4.4 Configuring CoS interface queue
      • 11.7.4.5 Viewing CoS interface queue status
      • 11.7.4.6 Configuring Enhanced Transmission Selection (ETS) interface
      • 11.7.4.7 Viewing Enhanced Transmission Selection (ETS) interface status
      • 11.7.4.8 Configuring Congestion Notification (CN)) Global configuration
      • 11.7.4.9 Configuring Congestion Notification (CN) Interface configuration
      • 11.7.4.10 Viewing Congestion Notification (CN) interface summary
  • 11.8 IPv4 Multicast Menu
    • 11.8.1 Managing DVMRP Protocol
      • 11.8.1.1 Configuring DVMRP Global Configuration Page
      • 11.8.1.2 Configuring DVMRP Interface Configuration Page
      • 11.8.1.3 Viewing DVMRP Configuration Summary
      • 11.8.1.4 Viewing DVMRP Next Hop Configuration Summary
      • 11.8.1.5 Viewing DVMRP Prune Summary
      • 11.8.1.6 Viewing DVMRP Route Summary
    • 11.8.2 Managing IGMP Protocol
      • 11.8.2.1 Configuring IGMP Global Configuration Page
      • 11.8.2.2 Configuring IGMP Interface Configuration Page
      • 11.8.2.3 Viewing IGMP Configuration Summary Page
      • 11.8.2.4 Viewing IGMP Cache Information Page
      • 11.8.2.5 Viewing IGMP Interface Membership Details Information Page
      • 11.8.2.6 Configuring IGMP Proxy Interface Congiuration Page
      • 11.8.2.7 Viewing IGMP Proxy Configration Summary Page
      • 11.8.2.8 Viewing IGMP Proxy Interface Membership Information Page
      • 11.8.2.9 Viewing IGMP Proxy Interface Membership Details Information Page
    • 11.8.3 Defining Multicast Configuration
      • 11.8.3.1 Configuring Multicast Global Configuration Page
      • 11.8.3.2 Configuring Interface’s Multicast Configuration Page
      • 11.8.3.3 Viewing Multicast MRoute Summary Page
      • 11.8.3.4 Configuring Multicast Static Routes Configuration Page
      • 11.8.3.5 Viewing Multicast Static Routes Configuration Page
      • 11.8.3.6 Configuring Multicast Admin Boundary Configuration Page
      • 11.8.3.7 Viewing Multicast Admin Boundary Configuration Page
    • 11.8.4 Managing PIM-DM Protocol
      • 11.8.4.1 Configuring PIM-DM Global Admin Configuration Page
      • 11.8.4.2 Configuring Interface’s PIM-DM Configuration Page
      • 11.8.4.3 Viewing Interface’s PIM-DM Configuration Page
    • 11.8.5 Managing PIM-SM Protocol
      • 11.8.5.1 Configuring PIM-SM Global Configuration Page
      • 11.8.5.2 Viewing PIM-SM Global Configuration Page
      • 11.8.5.3 Configuring PIM-SM SSM Range Configuration Page
      • 11.8.5.4 Configuring Interface’s PIM-SM Configuration Page
      • 11.8.5.5 Viewing Interface’s PIM-SM Configuration Page
      • 11.8.5.6 Configuring PIM-SM Candidate RP Configuration Page
      • 11.8.5.7 Configuring PIM-SM BSR Candidate Configuration Page
      • 11.8.5.8 Viewing PIM-SM BSR Candidate Summary Page
      • 11.8.5.9 Configuring PIM-SM Static RP Configuration Page
  • 11.9 IPv6 Multicast Menu
    • 11.9.1 Managing MLD
      • 11.9.1.1 Configuring MLD Global Configuration Page
      • 11.9.1.2 Configuring MLD Interface Configuration Page
      • 11.9.1.3 Viewing MLD Groups Summary Page
      • 11.9.1.4 Viewing MLD Interface Summary Page
      • 11.9.1.5 Viewing MLD Traffic Page
      • 11.9.1.6 Configuring MLD Proxy Interface Congiuration Page
      • 11.9.1.7 Viewing MLD Proxy Configration Summary Page
      • 11.9.1.8 Viewing MLD Proxy Interface Membership Information Page
      • 11.9.1.9 Viewing MLD Proxy Interface Membership Details Information Page
    • 11.9.2 Managing PIM-DM
      • 11.9.2.1 Configuring PIM-DM Global Configuration Page
      • 11.9.2.2 Configuring PIM-DM Interface Configuration Page
      • 11.9.2.3 Viewing PIM-DM Interface Summary Page
    • 11.9.3 Managing PIM-SM Protocol
      • 11.9.3.1 Configuring PIM-SM Global Configuration Page
      • 11.9.3.2 Viewing PIM-SM Global Status Page
      • 11.9.3.3 Configuring PIM-SM SSM Range Configuration Page
      • 11.9.3.4 Configuring Interface’s PIM-SM Configuration Page
      • 11.9.3.5 Viewing Interface’s PIM-SM Summary Page
      • 11.9.3.6 Configuring PIM-SM Candidate RP Configuration Page
      • 11.9.3.7 Configuring PIM-SM BSR Candidate Configuration Page
      • 11.9.3.8 Viewing PIM-SM BSR Candidate Summary Page
      • 11.9.3.9 Configuring PIM-SM Static RP Configuration Page
      • 11.9.3.10 Viewing Multicast MRoute Table Page