Fortinet 548B - Manual (Page 195)

- 195 -
7.3.13.5 set sflow rate
The user can go to the CLI Interface Configuration Mode to set sampling rate, use the sflow rate
<0-3600> interface configuration command. Use the no sflow rate return to default value zero.
Syntax
sflow rate <0-3600>
no sflow rate
Default Setting
0
Command Mode
Global Config
7.3.13.6 set sflow maximum header size
The user can go to the CLI Interface Configuration Mode to set maximum header size, use the sflow
maximum-header <20-256> interface configuration command. Use the no sflow maximum-header
return to default value 128.
Syntax
sflow sampler maxheadersize <20-256>
no sflow sampler maxheadersize
Default Setting
128
Command Mode
Interface Config
7.3.13.7 set sflow maximum datagram size
The user can go to the CLI Global Configuration Mode to set maximum datagram size, use the sflow
receiver <index> maxdatagram <200-9116> global configuration command. Use the no sflow
receiver <index> maxdatagram return to default value 1400.
Syntax
sflow receiver <index> maxdatagram <200-9116>
no sflow receiver <index> maxdatagram