1 general commands, 1 diffserv – Fortinet 548B User Manual

Page 361

Advertising
background image

- 361 -

allowed within a class definition. If a field is already specified for a class, all subsequent attempts to
specify the same field fail, including the cases where a field can be specified multiple ways through
alternative formats. The exception to this is when the 'exclude' option is specified, in which case this
restriction does not apply to the excluded fields.

The following class restrictions are imposed by the FortiSwitch-548B Series Switch DiffServ design:

nested class support limited to:

'all' within 'all'

no nested 'not' conditions

no nested 'acl' class types

each class contains at most one referenced class

hierarchical service policies not supported in a class definition

access list matched by reference only, and must be sole criterion in a class

that is, ACL rules copied as class match criteria at time of class creation, with class type 'any'

implicit ACL 'deny all' rule also copied

no nesting of class type 'acl'

Regarding nested classes, referred to here as class references, a given class definition can contain at
most one reference to another class, which can be combined with other match criteria. The referenced
class is truly a reference and not a copy, since additions to a referenced class affect all classes that
reference it. Changes to any class definition currently referenced by any other class must result in valid
class definitions for all derived classes otherwise the change is rejected. A class reference may be
removed from a class definition.

The user can display summary and detailed information for classes, policies, and services. All
configuration information is accessible via the CLI, Web, and SNMP user interfaces.

le

7.21.1

General Commands

The following characteristics are configurable for the platform as a whole.

7.21.1.1 diffserv

This command sets the DiffServ operational mode to active. While disabled, the DiffServ configuration is
retained and can be changed, but it is not activated. When enabled, Diffserv services are activated.

Syntax

diffserv

Command Mode

Global Config

Advertising