Fortinet 548B - Manual (Page 251)

- 251 -
Default Setting
None
Command Mode
Global Config
7.8.2.2 username defaultlogin
This command assigns the authentication login list to use for non-configured users when attempting to
log in to the system. This setting is overridden by the authentication login list assigned to a specific user
if the user is configured locally. If this value is not configured, users will be authenticated using local
authentication only.
Syntax
username defaultlogin <listname>
<listname> - an authentication login list.
Default Setting
None
Command Mode
Global Config
7.8.2.3 username login
This command assigns the specified authentication login list to the specified user for system login. The
<username> must be a configured <username> and the <listname> must be a configured login list.
If the user is assigned a login list that requires remote authentication, all access to the interface from all
CLI, web, and telnet sessions will be blocked until the authentication is complete.
i
T he login list associated with the ‘admin’ user cannot be changed to prevent
accidental lockout from the switch.
Syntax
username login <user> <listname>
<user> - is the login user name.
<listname> - an authentication login list.