Fortinet 548B - Manual (Page 243)

- 243 -
Command Mode
Privileged Exec
Display Message
User: Users configured locally to have access to the specified port.
7.8.1.9 show dot1x client
This command displays 802.1x client information.
Syntax
show dot1x clients {<slot/port> | all}
<slot/port> - is the desired interface number.
all - All interfaces.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Logical Interface: The logical port number associated with a client.
Interface: The physical port to which the supplicant is associated.
User Name: The user name used by the client to authenticate to the server.
Supplicant MAC Address: The supplicant device MAC address.
Session Time: The time since the supplicant is logged on.
Filter ID: Identifies the Filter ID returned by the RADIUS server when the client was authenticated.
This is a configured DiffServ policy name on the switch.
VLAN ID: The VLAN assigned to the port.
VLAN Assigned: The reason the VLAN identified in the VLAN ID field has been assigned to the
port. Possible values are RADIUS, Unauthenticated VLAN, or Default. When the VLAN Assigned
reason is Default, it means that the VLAN was assigned to the port because the PVID of the port was
that VLAN ID.
Session Timeout: This value indicates the time for which the given session is valid. The time period
in seconds is returned by the RADIUS server on authentication of the port.
Session Termination Action: This value indicates the action to be taken once the session timeout
expires. Possible values are Default and Radius-Request. If the value is Default, the session is
terminated and client details are cleared. If the value is Radius-Request, then a reauthentication of
the client is performed.