Fortinet 548B - Manual (Page 603)

- 603 -
Command Mode
Privileged Exec
User Exec
Display Message
PIM-DM Admin Mode: Indicates whether PIM-DM is enabled or disabled.
Interface: Valid unit, slot, and port number separated by forward slashes.
Interface Mode: Indicates whether PIM-DM is enabled or disabled on this interface.
Operational State: The current state of PIM-DM on this interface. Possible values are Operational
or Non-Operational.
10.6.1.2 show ipv6 pimdm interface
Use this command to display PIM-DM configuration information for all interfaces or for the specified
interface. If no interface is specified, configuration of all interfaces is displayed.
Syntax
show ipv6 pimdm interface {<slot/port>/all }
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
Interface Mode: Indicates whether PIM-DM is enabled or disabled on the specified interface.
PIM-DM Interface Hello Interval: The frequency at which PIM hello messages are transmitted on
this interface. By default, the value is 30 seconds.
10.6.1.3 show ipv6 pimdm neighbor
Use this command to display the PIM-DM neighbor information for all interfaces or for the specified
interface.
Syntax
show ipv6 pimdm neighbor [<slot/port>|all]
Default Setting
None