Fortinet 548B - Manual (Page 351)

- 351 -
7.19.1 Show Commands
7.19.1.1 show ip verify
This command displays the IPSG interface configurations on all ports.
Syntax
show ip verify [interface <slot/port>]
Default Setting
None
Command Mode
Privileged Exec
Display Message
Interface: Interface address in slot/port format.
Filter Type: Is one of two values:

ip-mac: User has configured MAC address filtering on this interface.

ip: Only IP address filtering on this interface.
7.19.1.2 show ip verify source
This command displays the IPSG interface and binding configurations on all ports.
Syntax
show ip verify source [interface <slot/port>]
Default Setting
None
Command Mode
Privileged Exec
Display Message
Interface: Interface address in slot/port format.
Filter Type: Is one of two values:

ip-mac: User has configured MAC address filtering on this interface.

ip: Only IP address filtering on this interface.
IP Address: IP address of the interface.
MAC Address: If MAC address filtering is not configured on the interface, the MAC Address field is
empty. If port security is disabled on the interface, then the MAC Address field displays "permit-all".