Fortinet 548B User Manual

Page 761

Advertising
background image

- 761 -

11.3.21.2 Configuring Port Security Interface Page

Selection Criteria

Slot/Port - Selects the interface to be configured.

Port Security - Enables or disables the Port Security feature for the selected interface.

Enable violation traps- Enables or disables the sending of new violation traps designating when a
packet with a disallowed MAC address is received on a locked port.

Enable violation Shutdown- Enables or disables the Port Security Violation Shutdown mode for the
selected interface.

Configurable Data

Maximum Number of Dynamically Learned MAC Addresses Allowed

-

Sets the maximum

number of dynamically learned MAC addresses on the selected interface.

Add a static MAC address- Adds a MAC address to the list of statically locked MAC addresses for
the selected interface.

VLAN ID- Adds a corresponding VLAN ID for the MAC Address being added to the list of statically
locked MAC addresses for the selected interface.

Maximum Number of Statically Locked MAC Addresses Allowed - Sets the maximum number of
statically locked MAC addresses on the selected interface.

Command Buttons

Clear - Clears the Dynamic MAC addresses of the selected interface.

Move - Convert a dynamically locked MAC address to a statically locked address. The Dynamic
MAC address entries are converted to Static MAC address entries in a numerically ascending order
till the Static limit is reached.

Submit - Applies the new configuration and causes the changes to take effect. These changes will
not be retained across a power cycle unless a save configuration is performed.

Advertising