Fortinet 548B - Manual (Page 613)

- 613 -
no - Use this command to set the join/prune interval to the default value.
Default Setting
60
Command Mode
Interface Config
10.7.2.11 ipv6 pimsm hello-interval
This command is used to configure the PIM-SM hello interval for the specified interface. The hello
interval range is 0-18000 is specified in seconds.
Syntax
ipv6 pimsm hello-interval <0-18000>
no ipv6 pimsm hello-interval
no - This command is used to set the hello interval to the default value.
Default Setting
30
Command Mode
Interface Config