9 show ipv6 ospf interface stats – Fortinet 548B User Manual

Page 574

Advertising
background image

- 574 -

10.4.1.9 show ipv6 ospf interface stats

This command displays the statistics for a specific interface. The command only displays

information if OSPF is enabled

Syntax

show ipv6 ospf interface stats <slot/port>

<slot/port> - Interface number.

Default Setting

None

Command Mode

Privileged Exec

User Exec

Display Messages

OSPFv3 Area ID: The area id of this OSPF interface.

IP Address: The IP address associated with this OSPF interface.

OSPFv3 Interface Events: The number of times the specified OSPF interface has changed its
state, or an error has occurred.

Virtual Events: The number of state changes or errors that occurred on this virtual link.

Neighbor Events: The number of times this neighbor relationship has changed state, or an error
has occurred.

Packets Received: The number of OSPFv3 packets received on the interface.

Packets Transmitted: The number of OSPFv3 packets sent on the interface.

LSAs Sent: The total number of LSAs flooded on the interface.

LSA Acks Received: The total number of LSA acknowledged from this interface.

LSA Acks Sent: The total number of LSAs acknowledged to this interface.

Sent Packets: The number of OSPF packets transmitted on the interface.

Received Packets: The number of valid OSPF packets received on the interface.

Discards: The number of received OSPF packets discarded because of an error in the packet or an
error in processing the packet.

Bad Version: The number of received OSPF packets whose version field in the OSPF header does
not match the version of the OSPF process handling the packet.

Virtual Link Not Found: The number of received OSPF packets discarded where the ingress
interface is in a non-backbone area and the OSPF header identifies the packet as belonging to the
backbone, but OSPF does not have a virtual link to the

packet’s sender.

Area Mismatch: The number of OSPF packets discarded because the area ID in the OSPF header
is not the area ID configured on the ingress interface.

Invalid Destination Address:

The number of OSPF packets discarded because the packet’s

destination IP address is not the address of the ingress interface and is not the AllDrRouters or
AllSpfRouters multicast addresses.

Advertising