Fortinet 548B - Manual (Page 447)

- 447 -
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Messages
Area ID: The area id of the requested OSPF area.
Neighbor: The neighbor interface of the OSPF virtual interface.
Hello Interval: The configured hello interval for the OSPF virtual interface.
Dead Interval: The configured dead interval for the OSPF virtual interface.
Retransmit Interval: The configured retransmit interval for the OSPF virtual interface.
Transit Delay: The configured transit delay for the OSPF virtual interface.
8.3.2 Configuration Commands
8.3.2.1 router ospf
Use this command to enter Router OSPF mode .
Syntax
router ospf
Default Setting
None
Command Mode
Global Config
8.3.2.2 enable
Use enable command resets the default administrative mode of OSPF in the router (active). no enable
command sets the administrative mode of OSPF in the router to inactive
Syntax
enable
no enable