Fortinet 548B - Manual (Page 604)

- 604 -
Command Mode
Privileged Exec
User Exec
Display Message
Interface: Valid unit, slot, and port number separated by forward slashes.
Neighbor Address: The IP address of the neighbor on an interface.
Up Time: The time since this neighbor has become active on this interface.
Expiry Time: The expiry time of the neighbor on this interface.
10.6.2 Configuration Commands
10.6.2.1 ipv6 pimdm
Use this command to administratively enable PIM-DM Multicast Routing Mode either across the router
(Global Config) or on a particular router (Interface Config).
Syntax
ipv6 pimdm
no ipv6 pimdm
no - Use this command to administratively disable PIM-DM Multicast Routing Mode either across the
router (Global Config) or on a particular router (Interface Config).
Default Setting
Disabled
Command Mode
Global Config
Interface Config
10.6.2.2 ipv6 pimdm hello-interval
Use this command to configure the PIM-DM hello interval for the specified router interface. The
hello-interval is specified in seconds and is in the range 30
–3600.
Syntax
ipv6 pimdm hello-interval <30-3600>
no ipv6 pimdm hello-interval